[asterisk-users] Exit Dial Application

[Atis Lezdins]

On Tue, Apr 14, 2009 at 9:14 PM, Christoph Fürstaller
<fuch_lists at kurtkrenn.com> wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Hi Atis,
>
> No problem : ) I tried it again, here is the log output:
>    -- Executing [236 at from-pbx:1] Set("Zap/31-1", "EXITCONTEXT=callback") in new stack
>    -- Executing [236 at from-pbx:2] Dial("Zap/31-1", "SIP/236||d") in new stack
>    -- Called 236
>    -- SIP/236-0825f928 is ringing
>    -- SIP/236-0825f928 is ringing
>    -- SIP/236-0825f928 is ringing
>    -- SIP/236-0825f928 is ringing

That's CLI interface output, log should have timestamps and much more
detail in it.

Check /var/log/asterisk/full (assuming default install location).
You'll need to enable "full" line in logger.conf, restart Asterisk and
issue "core set verbose 3" and "core set debug 1" in CLI.


Regards,
Atis


-- 
Atis Lezdins,
VoIP Project Manager / Developer,
IQ Labs Inc,
atis at iq-labs.net
Skype: atis.lezdins
Cell Phone: +371 28806004
Cell Phone: +1 800 7300689
Work phone: +1 800 7502835