[asterisk-users] Multi Frequency Cycle Timeout - E1-R2 METROTEL COLOMBIA

[Giovanny Magallanes]

Hi,

I have installed Elastix 1.5.2 (Barranquilla, Colombia (TELCO: METROTEL))
with a TE220P (2xE1) and TDM2400P (16FXS), openr2 is included in 1.5.2
version. The outcoming calls are ok, but with incoming call i have an error:

ERROR*[*14972*]* chan_dahdi.c: Chan 2 - Protocol error. Reason = Multi
Frequency Cycle Timeout, R2 State =
Seize ACK Transmitted, MF state = Category Request Transmitted, MF Group =
Backward Group A, CAS = 0x00
DNIS = 310, ANI = , MF = 0x20

I tried with all protocol variants availables, because seems thats the
cause, but I still have the problem.

elastix*CLI> mfcr2 show variant
Variant Code                                  Country
  AR                                Argentina
  BR                                   Brazil
  CN                                    China
  CZ                           Czech Republic
  CO                                 Colombia
  EC                                  Ecuador
 ITU    International Telecommunication Union
  MX                                   Mexico
  PH                              Philippines
  VE                                Venezuela
elastix*CLI>



The following link has the content of files: chan_dahdi.conf, system.conf,
and a tail of /var/log/asterisk/full

http://pastebin.com/f3424b319

Is this really a variant protocol problem? Any suggest?

Regards,



GM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090408/6e38e4bb/attachment.htm