[asterisk-users] Nothing at /proc/zaptel with new Digium TE201

[Shaun Ruffell]

criptos wrote:
> This is a new installation.
> 08:08.0 Ethernet controller: Digium, Inc. Unknown device 8000 (rev 11)
> (ethernet?? first time with a card like that for me)
> 
> dmesg
> Zapata Telephony Interface Registered on major 196
> Zaptel Version: 1.4.12.1
> Zaptel Echo Canceller: MG2
> 
> proc & dev
> root at asterisk:/proc/zaptel# ls
> root at asterisk:/proc/zaptel# 
> root at asterisk:/dev/zap# ls -la * 
> crw-rw---- 1 root root 196, 254 2009-04-02 01:40 channel
> crw-rw---- 1 root root 196,   0 2009-04-02 01:40 ctl
> crw-rw---- 1 root root 196, 255 2009-04-02 01:40 pseudo
> crw-rw---- 1 root root 196, 253 2009-04-02 01:40 timer
> 
> Help! I really don't know what is happening.
> The card is a PCIe

It appears as if you have a TE121 installed in your system which is 
serviced by the wcte12xp driver.  Does 'lsmod | grep wcte12xp' show that 
the wcte12xp driver is loaded?  If not, what happens when you run 
'modprobe wcte12xp'?

-- 
Shaun Ruffell
Digium, Inc. | Linux Kernel Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
Check us out at: www.digium.com & www.asterisk.org