[asterisk-users] chan_misdn troubles

[Thanos Koukoulis]

Hello

I have just set up Asterisk Asterisk 1.4.21.2 on a CentOS 5.2 machine.
I am using the OpenVox B200P ISDN card.

My problem is that even though chan_misdn module seems to be loaded
correctly with
Asterisk (I can see it using 'module show' command) the misdn commands are
not available
to me in the CLI so I cannot tell if my box is correctly interfacing with
the ISDN card

Any ideas what can be going wrong ?

My installation procedure looked like this :

cd /usr/src/
  wget http://www.misdn.org/downloads/mISDN.tar.gz
  wget http://www.misdn.org/downloads/mISDNuser.tar.gz
  tar xzf mISDN.tar.gz
  tar xzf mISDNuser.tar.gz
  cd ../mISDN-1_1_7_2/
  make install
  cd ../mISDNuser-1_1_7_2/
  make install

cd asterisk-1.4.21.2/
make menuconfig (I chose chan_misdn)
make; make install;
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080923/f3d5139c/attachment.htm