[asterisk-users] Asterisk installation

[Eric "ManxPower" Wieling]

Then you should read the READMEs right now.  See the 3 upgrade info 
files as well as any other READMEs.

Christian wrote:
> Hello,
> Many thanks for the info.
> OK, I didn't know that. I just installed it. Usually I read the included read me files and so on but not at this time.
> But I will be able to use my old zaptel hardware that i used with v1.4?
> Many thanks,
> Christian
> 
> 
> On 2008-10-31 at 22:31 Darrick Hartman wrote:
> 
>> Time for you to discover who's your dahdi...
>>
>> Asterisk 1.6 used dahdi and not zaptel. 
>> ------Original Message------
>> From: Christian
>> Sender: asterisk-users-bounces at lists.digium.com
>> To: asterisk-users at lists.digium.com
>> ReplyTo: Asterisk Users Mailing List - Non-Commercial Discussion
>> Subject: [asterisk-users] Asterisk installation
>> Sent: Oct 31, 2008 5:25 PM
>>
>> Hi all,
>> I've just installed the latest v1.6 release of Asterisk. First, I
>> isntalled libpri.
>> Then i installed zaptel with make config at the end of the isntallation as
>> I usually do.
>> Then I installed Asterisk.
>> However, there is no zapata.conf file in /etc/asterisk. I isntalled the
>> sample configuration files.
>> Any tips?
>> Many thanks,
>> Christian