[asterisk-users] asterisk video

Nhadie nhadie at gmail.com
Thu Oct 23 08:59:27 CDT 2008


Hi sir,

sorry typo on the e-mail, this is what i have:

sip.conf

[100666]
type=friend
secret=666
allow=h263
allow=all
dtmfmode=rfc2833
canreinvite=no
host=dynamic
context=testvideo
nat=yes

[100777]
type=friend
secret=777
allow=h263
allow=all
dtmfmode=rfc2833
canreinvite=no
host=dynamic
context=testvideo
nat=yes

extensions.conf

[testvideo]
exten => 666,1,Dial(SIP/100666|30|t)
exten => 666,n,Hangup
exten => 777,1,Dial(SIP/100777|30|t)
exten => 777,n,Hangup

Robert Augustyn wrote:
>  
> 
>> -----Original Message-----
>> From: asterisk-users-bounces at lists.digium.com 
>> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Nhadie
>> Sent: Thursday, October 23, 2008 6:57 AM
>> To: Asterisk Users Mailing List - Non-Commercial Discussion
>> Subject: Re: [asterisk-users] asterisk video
>>
>>
>>
>> Gordon Henderson wrote:
>>> On Thu, 23 Oct 2008, Nhadie wrote:
>>>
>>>> hi,
>>>>
>>>> hs anyone able to make video to work on asterisk? i tried 
>> following this:
>>>>
>> http://www.voip-info.org/tiki-index.php?page=Asterisk+phone+xten+eyeB
>>>> eam
>>>>
>>>> i can see that eyebeam is trying to broadcast a video but 
>> the other 
>>>> eyebeam is not receiving it.
>>> What's the other end? Grandstreams won't take H263p, so force 
>>> eyebeam/x-lite to only use H263, and just put this in as 
>> the codec in 
>>> sip.conf.
>> hi sir
>>
>> both sides using eyebeam, i also hardset codec to use basic H236.
>>
>> then i allowed the codec, allow=h236. i'm using Asterisk 
>> 1.4.21.2., could that be the reason? coz document says video 
>> on 1.4 is on infancy.
> 
> Make sure you have h263 and not h236 ...
> I have the same configuration as yours and it work ok
> If you still have problems post your relevant sip configuration
> 
>>
>>> I presume you've read this too:
>>>
>>>    http://www.voip-info.org/wiki-Asterisk+video
>>>
>>>> i tested the same setup but this time using ser with rtpproxy and 
>>>> eyebeam video works fine.
>>>>
>>>> any ideas? where do you think should i start troubleshooting this?
>>> I'm using Video with asterisk version 1.2 and it's working 
>> very well 
>>> so-far. Using Grandsteam phones - done one test with an ATL 
>> phone and 
>>> made a few calls to someone using x-lite. Tring to get 
>> Ekiga to work, 
>>> but I can't get the codecs for my wifes Acer One notebook.
>>>
>>> Biggest problem is codec selection. Make sure both ends support the 
>>> same thing, and that asterisk can route it.
>>>
>>> Gordon
>>>
>>> _______________________________________________
>>> -- Bandwidth and Colocation Provided by 
>> http://www.api-digital.com --
>>> asterisk-users mailing list
>>> To UNSUBSCRIBE or update options visit:
>>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>>
>> _______________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> 
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 



More information about the asterisk-users mailing list