[asterisk-users] asterisk video

[Nhadie]

Gordon Henderson wrote:
> On Thu, 23 Oct 2008, Nhadie wrote:
> 
>> hi,
>>
>> hs anyone able to make video to work on asterisk? i tried following this:
>>
>> http://www.voip-info.org/tiki-index.php?page=Asterisk+phone+xten+eyeBeam
>>
>> i can see that eyebeam is trying to broadcast a video but the other
>> eyebeam is not receiving it.
> 
> What's the other end? Grandstreams won't take H263p, so force 
> eyebeam/x-lite to only use H263, and just put this in as the codec in 
> sip.conf.

hi sir

both sides using eyebeam, i also hardset codec to use basic H236.

then i allowed the codec, allow=h236. i'm using Asterisk 1.4.21.2.,
could that be the reason? coz document says video on 1.4 is on infancy.


> 
> I presume you've read this too:
> 
>    http://www.voip-info.org/wiki-Asterisk+video
> 
>> i tested the same setup but this time using ser with rtpproxy and
>> eyebeam video works fine.
>>
>> any ideas? where do you think should i start troubleshooting this?
> 
> I'm using Video with asterisk version 1.2 and it's working very well 
> so-far. Using Grandsteam phones - done one test with an ATL phone and made 
> a few calls to someone using x-lite. Tring to get Ekiga to work, but I 
> can't get the codecs for my wifes Acer One notebook.
> 
> Biggest problem is codec selection. Make sure both ends support the same 
> thing, and that asterisk can route it.
> 
> Gordon
> 
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>