[asterisk-users] Cisco 7906g & SIP

[Duncan Turnbull]

Hi Salvatore

You need to look at the logs of the tftp server, not the phone. 
Hopefully you can see the ip address of the phone asking for files

If there is nothing at all being requested from the tftp server then you 
probably want to reset the phone to defaults again.

Usually it stalls when you have some mismatches in the config files. But 
it almost always asks for the default files.

 From the files requested you can determine whether its asking for SIP 
or SCCP files, and if SIP which version of firmware for the phone

Cheers Duncan

Sasa wrote:
> Hi Dave,
> I don't view nothing in tftp server because the phone is stopped on start 
> screen with displayed 'upgrading' and MAC address..I don't understand what 
> happened after the reset. phone
> Regards.
> 
> ------
> 
>    Salvatore.
> 
> 
> 
> ----- Original Message ----- 
> From: "David Gibbons" <dave at videon-central.com>
> To: "Asterisk Users Mailing List - Non-Commercial Discussion" 
> <asterisk-users at lists.digium.com>
> Sent: Monday, October 13, 2008 4:29 PM
> Subject: Re: [asterisk-users] Cisco 7906g & SIP
> 
> 
>> Hi Salvatore,
>>
>> I'm talking about the tftp logs on the tftp server:
>>
>> Something like 'tail -f /var/log/tftp' or 'tail -f /var/log/messages' 
>> should do the trick.
>>
>> Dave
>>
>> -----Original Message-----
>> From: asterisk-users-bounces at lists.digium.com 
>> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Sasa
>> Sent: Monday, October 13, 2008 9:57 AM
>> To: Asterisk Users Mailing List - Non-Commercial Discussion
>> Subject: Re: [asterisk-users] Cisco 7906g & SIP
>>
>> I cann't view phone log files because, after reboot, the phone is stopped 
>> on
>> this screen ( 'upgrading' with MAC address) !
>> Regards.
>>
>> ------
>>
>>   Salvatore.
>>
>>
>>