[asterisk-users] Cisco 7906g & SIP

Peter Mueller pmueller at mueller-alsenz.de
Mon Oct 13 14:01:05 CDT 2008 

Hi,

i had the same problem with an 7970g. You should open one of the files,
tht end with .loads and compare the files on you tftp-server with the
list at the end of this file. Pay attention on case sensitive writing of
filenames.
I had to changed the jarXYZ.sbn to JarXYZ.sbn an the upgrade was
properly done.

Greetings Peter

David Gibbons schrieb:
> Hi Salvatore,
>
> I'm talking about the tftp logs on the tftp server:
>
> Something like 'tail -f /var/log/tftp' or 'tail -f /var/log/messages' should do the trick.
>
> Dave
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Sasa
> Sent: Monday, October 13, 2008 9:57 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [asterisk-users] Cisco 7906g & SIP
>
> I cann't view phone log files because, after reboot, the phone is stopped on
> this screen ( 'upgrading' with MAC address) !
> Regards.
>
> ------
>
>    Salvatore.
>
>
>
> ----- Original Message -----
> From: "David Gibbons" <dave at videon-central.com>
> To: "Asterisk Users Mailing List - Non-Commercial Discussion"
> <asterisk-users at lists.digium.com>
> Sent: Monday, October 13, 2008 3:29 PM
> Subject: Re: [asterisk-users] Cisco 7906g & SIP
>
>
>   
>> When the 'upgrading' process fails, it means that one or more of the
>> required files is missing from the TFTP root folder. Check the logs to see
>> which file it fails on, get that file and you should be good to go.
>>
>>
>>
>> -----Original Message-----
>> From: asterisk-users-bounces at lists.digium.com
>> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Sasa
>> Sent: Monday, October 13, 2008 9:24 AM
>> To: Asterisk Users Mailing List - Non-Commercial Discussion
>> Subject: Re: [asterisk-users] Cisco 7906g & SIP
>>
>> Hi,
>> I have try again with your method but after that the phone reboot I have
>> on
>> the screen phone displayed 'upgrading' with MAC address but the reset
>> process is stopped !
>> Thanks.
>>
>> ------
>>
>>   Salvatore.
>>
>>
>>
>> ----- Original Message -----
>> From: "David Gibbons" <dave at videon-central.com>
>> To: "Asterisk Users Mailing List - Non-Commercial Discussion"
>> <asterisk-users at lists.digium.com>
>> Sent: Thursday, October 09, 2008 4:53 PM
>> Subject: Re: [asterisk-users] Cisco 7906g & SIP
>>
>>
>>     
>>> Please send the TFTP log after using the regular factory reset method I
>>> described.
>>>
>>> Thanks
>>> Dave
>>>
>>> -----Original Message-----
>>> From: asterisk-users-bounces at lists.digium.com
>>> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Sasa
>>> Sent: Thursday, October 09, 2008 10:46 AM
>>> To: Asterisk Users Mailing List - Non-Commercial Discussion
>>> Subject: Re: [asterisk-users] Cisco 7906g & SIP
>>>
>>> Hi Dave,
>>> I have tried restore to factory default value (as you have recommended to
>>> me) but without success, however also with only files:
>>>
>>> SEP<MAC>.conf file
>>> contents of the cop file
>>>
>>> ..but the result isn't changed !
>>> Thanks in advance.
>>>
>>> ------
>>>
>>>   Salvatore.
>>>
>>>
>>>
>>>
>>>
>>> ----- Original Message -----
>>> From: "David Gibbons" <dave at videon-central.com>
>>> To: "Asterisk Users Mailing List - Non-Commercial Discussion"
>>> <asterisk-users at lists.digium.com>
>>> Sent: Thursday, October 09, 2008 2:59 PM
>>> Subject: Re: [asterisk-users] Cisco 7906g & SIP
>>>
>>>
>>>       
>>>> Sasa,
>>>>
>>>> Sometimes I have to do a hard reset of the phone in order to get it to
>>>> load the SIP firmware, even when the load file is specified in the
>>>> SEP<MAC>.conf file.
>>>>
>>>> Make sure that only the contents of the cop file and the SEP<mac>.cnf
>>>> file
>>>> are present in your tftp root. Then unplug the phone and press and hole
>>>> the # key. Plug the phone back in, still holding the # key. When the
>>>> line
>>>> buttons begin turn on and off in sequence, press 123456789*0#.
>>>>
>>>> This will factory reset the phone and should cause it to check the
>>>> termxx.default.loads file for the proper image. It will then read the
>>>> SIP
>>>> image name from that file and flash itself with the SIP image.
>>>>
>>>> Dave
>>>>
>>>> -----Original Message-----
>>>> From: asterisk-users-bounces at lists.digium.com
>>>> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Sasa
>>>> Sent: Thursday, October 09, 2008 8:51 AM
>>>> To: Asterisk Users Mailing List - Non-Commercial Discussion
>>>> Subject: Re: [asterisk-users] Cisco 7906g & SIP
>>>>
>>>> Hi Dave,
>>>> the cmterm-7911_7906-sip.8-0-4sr1.cop is a compressed file and on the
>>>> inside
>>>> has:
>>>>
>>>> apps11.1-1-3-15.sbn
>>>> cnu11.3-1-3-15.sbn
>>>> copstart.sh
>>>> cvm11sip.8-0-3-16.sbn
>>>> dsp11.1-1-3-15.sbn
>>>> jar11sip.8-0-3-16.sbn
>>>> load307
>>>> load369
>>>> SIP11.8-0-4SR1S.loads
>>>> term06.default.loads
>>>> term11.default.loads
>>>>
>>>> I use Cisco7941 without callmanager software but only with SIP support.
>>>> Thanks.
>>>>
>>>> ------
>>>>
>>>>   Salvatore.
>>>>
>>>>
>>>>
>>>> ----- Original Message -----
>>>> From: "David Gibbons" <dave at videon-central.com>
>>>> To: "Asterisk Users Mailing List - Non-Commercial Discussion"
>>>> <asterisk-users at lists.digium.com>
>>>> Sent: Thursday, October 09, 2008 2:30 PM
>>>> Subject: Re: [asterisk-users] Cisco 7906g & SIP
>>>>
>>>>
>>>>         
>>>>> Sasa,
>>>>>
>>>>> You can actually just rename the .cop file to a .tar.gz file. Cisco
>>>>> doesn't have (to my knowledge) any non-callmanager SIP software. The
>>>>> SIP
>>>>> load is just a SIP load, not a SIP load unique to generic SIP or
>>>>> callmanager.
>>>>>
>>>>> Dave
>>>>>
>>>>> -----Original Message-----
>>>>> From: asterisk-users-bounces at lists.digium.com
>>>>> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Stefan
>>>>> Gofferje
>>>>> Sent: Thursday, October 09, 2008 7:28 AM
>>>>> To: Asterisk Users Mailing List - Non-Commercial Discussion
>>>>> Subject: Re: [asterisk-users] Cisco 7906g & SIP
>>>>>
>>>>> Sasa schrieb:
>>>>>           
>>>>>>> I need other files other than those obtained with
>>>>>>> cmterm-7911_7906-sip.8-0-4sr1.cop ??
>>>>>>>               
>>>>> cmterm is the callmanager software. You need to get the non-callmanager
>>>>> SIP-software. Contact your local Cisco representative to buy a license
>>>>> for that.
>>>>>
>>>>> Terve,
>>>>> Stefan
>>>>>
>>>>> --
>>>>> Last words of a stormchaser:
>>>>> "Where is that rotation on the radar?!"
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>>>
>>>>> asterisk-users mailing list
>>>>> To UNSUBSCRIBE or update options visit:
>>>>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>>
>>>>> _______________________________________________
>>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>>>
>>>>> asterisk-users mailing list
>>>>> To UNSUBSCRIBE or update options visit:
>>>>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>>
>>>>>           
>>>> _______________________________________________
>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>>
>>>> asterisk-users mailing list
>>>> To UNSUBSCRIBE or update options visit:
>>>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>
>>>> _______________________________________________
>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>>
>>>> asterisk-users mailing list
>>>> To UNSUBSCRIBE or update options visit:
>>>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>
>>>>         
>>> _______________________________________________
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>
>>> asterisk-users mailing list
>>> To UNSUBSCRIBE or update options visit:
>>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>>
>>> _______________________________________________
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>
>>> asterisk-users mailing list
>>> To UNSUBSCRIBE or update options visit:
>>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>>
>>>       
>> _______________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>> _______________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>     
>
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20081013/83fd69d9/attachment.htm 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 542 bytes
Desc: OpenPGP digital signature
Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20081013/83fd69d9/attachment.pgp

More information about the asterisk-users mailing list