[asterisk-users] Cisco 7906g & SIP

David Gibbons dave at videon-central.com
Mon Oct 13 08:29:38 CDT 2008


When the 'upgrading' process fails, it means that one or more of the required files is missing from the TFTP root folder. Check the logs to see which file it fails on, get that file and you should be good to go.



-----Original Message-----
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Sasa
Sent: Monday, October 13, 2008 9:24 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Cisco 7906g & SIP

Hi,
I have try again with your method but after that the phone reboot I have on
the screen phone displayed 'upgrading' with MAC address but the reset
process is stopped !
Thanks.

------

   Salvatore.



----- Original Message -----
From: "David Gibbons" <dave at videon-central.com>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users at lists.digium.com>
Sent: Thursday, October 09, 2008 4:53 PM
Subject: Re: [asterisk-users] Cisco 7906g & SIP


> Please send the TFTP log after using the regular factory reset method I
> described.
>
> Thanks
> Dave
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Sasa
> Sent: Thursday, October 09, 2008 10:46 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [asterisk-users] Cisco 7906g & SIP
>
> Hi Dave,
> I have tried restore to factory default value (as you have recommended to
> me) but without success, however also with only files:
>
> SEP<MAC>.conf file
> contents of the cop file
>
> ..but the result isn't changed !
> Thanks in advance.
>
> ------
>
>   Salvatore.
>
>
>
>
>
> ----- Original Message -----
> From: "David Gibbons" <dave at videon-central.com>
> To: "Asterisk Users Mailing List - Non-Commercial Discussion"
> <asterisk-users at lists.digium.com>
> Sent: Thursday, October 09, 2008 2:59 PM
> Subject: Re: [asterisk-users] Cisco 7906g & SIP
>
>
>> Sasa,
>>
>> Sometimes I have to do a hard reset of the phone in order to get it to
>> load the SIP firmware, even when the load file is specified in the
>> SEP<MAC>.conf file.
>>
>> Make sure that only the contents of the cop file and the SEP<mac>.cnf
>> file
>> are present in your tftp root. Then unplug the phone and press and hole
>> the # key. Plug the phone back in, still holding the # key. When the line
>> buttons begin turn on and off in sequence, press 123456789*0#.
>>
>> This will factory reset the phone and should cause it to check the
>> termxx.default.loads file for the proper image. It will then read the SIP
>> image name from that file and flash itself with the SIP image.
>>
>> Dave
>>
>> -----Original Message-----
>> From: asterisk-users-bounces at lists.digium.com
>> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Sasa
>> Sent: Thursday, October 09, 2008 8:51 AM
>> To: Asterisk Users Mailing List - Non-Commercial Discussion
>> Subject: Re: [asterisk-users] Cisco 7906g & SIP
>>
>> Hi Dave,
>> the cmterm-7911_7906-sip.8-0-4sr1.cop is a compressed file and on the
>> inside
>> has:
>>
>> apps11.1-1-3-15.sbn
>> cnu11.3-1-3-15.sbn
>> copstart.sh
>> cvm11sip.8-0-3-16.sbn
>> dsp11.1-1-3-15.sbn
>> jar11sip.8-0-3-16.sbn
>> load307
>> load369
>> SIP11.8-0-4SR1S.loads
>> term06.default.loads
>> term11.default.loads
>>
>> I use Cisco7941 without callmanager software but only with SIP support.
>> Thanks.
>>
>> ------
>>
>>   Salvatore.
>>
>>
>>
>> ----- Original Message -----
>> From: "David Gibbons" <dave at videon-central.com>
>> To: "Asterisk Users Mailing List - Non-Commercial Discussion"
>> <asterisk-users at lists.digium.com>
>> Sent: Thursday, October 09, 2008 2:30 PM
>> Subject: Re: [asterisk-users] Cisco 7906g & SIP
>>
>>
>>> Sasa,
>>>
>>> You can actually just rename the .cop file to a .tar.gz file. Cisco
>>> doesn't have (to my knowledge) any non-callmanager SIP software. The SIP
>>> load is just a SIP load, not a SIP load unique to generic SIP or
>>> callmanager.
>>>
>>> Dave
>>>
>>> -----Original Message-----
>>> From: asterisk-users-bounces at lists.digium.com
>>> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Stefan
>>> Gofferje
>>> Sent: Thursday, October 09, 2008 7:28 AM
>>> To: Asterisk Users Mailing List - Non-Commercial Discussion
>>> Subject: Re: [asterisk-users] Cisco 7906g & SIP
>>>
>>> Sasa schrieb:
>>>>> I need other files other than those obtained with
>>>>> cmterm-7911_7906-sip.8-0-4sr1.cop ??
>>>
>>> cmterm is the callmanager software. You need to get the non-callmanager
>>> SIP-software. Contact your local Cisco representative to buy a license
>>> for that.
>>>
>>> Terve,
>>> Stefan
>>>
>>> --
>>> Last words of a stormchaser:
>>> "Where is that rotation on the radar?!"
>>>
>>>
>>> _______________________________________________
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>
>>> asterisk-users mailing list
>>> To UNSUBSCRIBE or update options visit:
>>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>>
>>> _______________________________________________
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>
>>> asterisk-users mailing list
>>> To UNSUBSCRIBE or update options visit:
>>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>>
>>
>>
>> _______________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>> _______________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>


_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users



More information about the asterisk-users mailing list