[asterisk-users] cisco phones getting SIP 401 unauthorized

[Jerry Geis]

>
> Did you check sip.conf to make sure that the port is correctly set to 5060?
>
> Please show the output of Cli> sip show peer <peernumber> and the contents of your SEP<MAC>.cnf file.
>
> Dave
>   

sip.conf has :

bindport=5060                   ; UDP Port to bind to (SIP standard port 
is 5060)
bindaddr=X.X.X.X            ; ress to bind to (0.0.0.0 binds to all)
srvlookup=yes                   ; Enable DNS SRV lookups on outbound calls
                         

One extension cisco in sip.conf is:
[402]
type=friend
dtmfmode=rfc2833
username=402
secret=XXXXXXX
disallow=all
allow=ulaw
allow=alaw
host=dynamic
context=local-sip
nat=yes
canreinvite=no
callerid="John Smith" <402>

sip show peer 402
  * Name       : 402
  Secret       : <Set>
  MD5Secret    : <Not set>
  Context      : smvoice-sip
  Subscr.Cont. : <Not set>
  Language     : >
  AMA flags    : Unknown
  CallingPres  : Presentation Allowed, Not Screened
  Callgroup    :
  Pickupgroup  :
  Mailbox      :
  VM Extension : asterisk
  LastMsgsSent : 32767/65535
  Call limit   : 0
  Dynamic      : Yes
  Callerid     : "John Smith" <402>
  Expire       : -1
  Insecure     : no
  Nat          : Always
  ACL          : No
  CanReinvite  : No
  PromiscRedir : No
  User=Phone   : No
  Trust RPID   : No
  Send RPID    : No
  DTMFmode     : rfc2833
  LastMsg      : 0
  ToHost       :
  Addr->IP     : (Unspecified) Port 0
  Defaddr->IP  : 0.0.0.0 Port 5060
  Def. Username: 402
  SIP Options  : (none)
  Codecs       : 0xc (ulaw|alaw)
  Codec Order  : (ulaw,alaw)
  Status       : Unmonitored
  Useragent    :
  Reg. Contact :


SIP Config file:

# SIP Configuration Generic File (start)


# Proxy Server
proxy1_address: "X.X.X.X"  
proxy2_address: "X.X.X.X"  
proxy3_address: "X.X.X.X"  
proxy4_address: "X.X.X.X"  
proxy5_address: "X.X.X.X"  
proxy6_address: "X.X.X.X"  

# Line 1 Settings
line1_name: "402"                     ; Line 1 Extension\User ID
line1_displayname: "402"           ; Line 1 Display Name
line1_authname: "402"         ; Line 1 Registration Authentication
line1_password: "402"         ; Line 1 Registration Password

# Line 2 Settings
line2_name: "403"                          ; Line 2 Extension\User ID
line2_displayname: "403"                   ; Line 2 Display Name
line2_authname: "403"         ; Line 2 Registration Authentication
line2_password: "403"         ; Line 2 Registration Password

# Emergency Proxy info
proxy_emergency: ""
proxy_emergency_port: "5060"

# Backup Proxy info
proxy_backup: ""
proxy_backup_port: "5060"

# Outbound Proxy info
outbound_proxy: ""
outbound_proxy_port: "5060"

# NAT/Firewall Traversal
nat_enable: "0"
nat_address: ""
voip_control_port: "5060"
start_media_port: "16384"
end_media_port:  "32766"
nat_received_processing: "1"

# Phone Label (Text desired to be displayed in upper right corner)
phone_label: "JDA  402  "            ; Has no effect on SIP messaging

# Time Zone phone will reside in
time_zone: EST 

# Telnet Level (enable or disable the ability to telnet into this phone
telnet_level: "0"      ; 0-Disabled (default), 1-Enabled, 2-Privileged

# Phone prompt/password for telnet/console session
phone_prompt: "Go Away"                              ; Telnet/Console Prompt
phone_password: "cisco"                          ; Telnet/Console Password

proxy_register: 1 

# Enable_VAD (1-enabled, 0-disabled)
enable_vad: "0"

# Network Media Type (auto, full100, full10, half100, half10)
network_media_type: "auto"
user_info: phone

# URL for external Directory location
#logo_url: "http://10.0.1.3/10-20logo.bmp"                    ; URL for branding logo to be used on phone display

# SIP Configuration Generic File (stop)