[asterisk-users] Cisco 7906g & SIP

[Duncan Turnbull]

Are you sure you have set the 7960 to SIP?

By default they use SCCP, so you need to go through the process of 
changing them over, which ideally would just be done with the edits you 
have already in the load files but generally means going back to an 
early version of the SIP code then working upwards from there.

You can check the current hardware in the status, if its SIP it will be 
something like POS-0806... (I haven't got a phone handy to check) but 
there is a reasonable amount of info on voipinfo about the process

Cheers Duncan

Sasa wrote:
> Hi, I have a problem with Cisco 7906G and SIP protocol use with Asterisk 
> 1.2.26.
> I have uploaded in my tftp server the firmware 
> 'cmterm-7911_7906-sip.8-0-4SR1' that use 'SIP11.8-0-4SR1S.loads' and in 
> SEPmacaddress.cnf.xml I have:
> 
> <loadInformation>SIP11.8-0-4SR1S</loadInformation>
> 
> ..but in tftp log server I have:
> 
> Oct 07 11:56:22 asterisk1.local atftpd[6230.-1208161360]: Serving 
> CTLSEPmacaddress.tlv to 192.168.0.155:49152
> Oct 07 11:56:22 asterisk1.local atftpd[6230.-1208161360]: Serving 
> SEPmacaddress.cnf.xml to 192.168.0.155:49153
> 
> ..and in asterisk CLI I have:
> 
> -- Starting Skinny session from 192.168.0.155
> Device SEPmacaddress is attempting to register
> 
> Now when 7906G started is loaded:
> 
> load file: sccp11.8-3-2s
> boot load id: tnp06.3-0-1-31.bin
> 
> ..why isn't loaded sip firmware ??
> Thanks in advance.
> 
> ------
> 
>    Salvatore. 
> 
> 
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> 
> AstriCon 2008 - September 22 - 25 Phoenix, Arizona
> Register Now: http://www.astricon.net
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users