[asterisk-users] t1 cards

Eric Fort eric.fort at gmail.com
Fri Oct 3 02:14:07 CDT 2008


yes, more than 300 meters (longer than copper based ethernet allows).  Yes
to E1, as I understand it, it's just a config change on many cards anyway.
I'm specificly looking at pci based t1/e1 cards because I'm finding single
port cards on ebay going for 100-200 usd.  in some cases I may want to drive
a channel bank at the far end, thus t1/e1.  anyone have experience on how
far these pci based cards will drive when wired back to back?

Eric

On Thu, Oct 2, 2008 at 11:34 PM, Gordon Henderson <
gordon+asterisk at drogon.net <gordon%2Basterisk at drogon.net>> wrote:

> On Thu, 2 Oct 2008, Eric Fort wrote:
>
>  I presently need to connect a few channels of voice and data between
>> multiple locations where I own the copper between them.  Each location
>> exceeds 300M from any other location.  I'm thinking of generating T1's and
>> running those between locations.  If I use PC based cards wired back to
>> back
>> (I can do that, right?) what kind of distance can I expect to be able to
>> span without needing repeaters?  What inexpensive cards can you recommend
>> for use with asterisk?  I'm considering either digium or sangoma.  Would I
>> get any better performance if I used a sync-serial card connected to a
>> separate csu/dsu?
>>
>
> 300 metres, right? (not 300 miles?)
>
> Why stop at T1? Go for E1 :) with the right kit at each end you ought to be
> able to get 2Mb/sec or more. (distance depending)
>
> Personally, I'd go for a technology that gave me Ethernet at each end -
> then it makes it much easier to mix voice and data - But using something
> like a sync. modem and line driver then you need a media converter of some
> sorts at each end which might bump up the cost - at the savings of the E1
> card in the PC though. Last time I had bare copper to play with (a BT EPS8
> circuit) I had a 2Mb modem at each end going into a Cisco 2600 which was
> running CHDLC over the link and acting as nothing more than a dumb media
> converter to give me Ethernet at each end. This was 6 years ago though.
>
> Ah, Looks like the technology has improved somewhat:
>
>  http://www.blackbox.com/Catalog/Detail.aspx?cid=381,1452,1468&mid=5261
>
> From the UK site:
>
> Or even:
>
>  http://www.blackbox.com/Catalog/Detail.aspx?cid=425,1423,1424&mid=4946
>
> (same thing from the UK site:)
>
>
> http://www.blackbox.co.uk/solutions/display.asp?cs=dvh&id=1&doc=lb300a-r2&tx=LAN&sx=Network%20Appliances
>
> You need a pair, obviously...
>
> Hm. US site is $305, UK £253. Rip-off Britain again by the looks of it....
>
> As for inexpensive cards - OpenVox. Their E1 cards seem to work OK, but if
> using a LAN extender, then they're not neeed at all...
>
> Gordon
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> AstriCon 2008 - September 22 - 25 Phoenix, Arizona
> Register Now: http://www.astricon.net
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20081003/a5eeb978/attachment.htm 


More information about the asterisk-users mailing list