[asterisk-users] [SPAM] - Asterisk and S-Bus - Email found in subject

[Andrew Thomas]

Have you set port 2 as 'NT' in the mISDN config file (not the Asterisk one)?

Also, you will probably need to set it to ptmp.

You need to configure them in misdn.conf (the Asterisk one this time).

Here's the tail of my misdn.conf (4 x BRI):

    [trunks]
    ports = 1,2 ; physical port numbers (as defined in mISDN.conf)
    context = inbound ; context for incoming calls in extensions.conf
    msns = * ; accept and process every number that comes in and let my extensions.conf sort it out (easiest way)

    [extensions]
    ports = 3,4 ; physical port numbers (as defined in mISDN.conf)
    context = default ; context for internal users in extensions.conf

Ports 1 and 2 are my trunk lines - ports 3 and 4 are my ISDN modems.

Hope that helps.

Andy

 -----Original Message-----
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Steven.Moughan at lakecommunications.com
Sent: 28 November 2008 11:54
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [SPAM] - [asterisk-users] Asterisk and S-Bus - Email found in subject


Hi everyone, 

I've built an Asterisk server (1.4.22) on a Debian Etch 4.0 base system (Kernel 2.6.18). I have so far installed AsteriskGUI and the Zaptel, libPRI and mISDN drivers. 

The hardware is a dual processor, dual core Xeon 2ghz (per core) server with one Digium Wildcard B410P (4 FXS - 4 FXO) and one Beronet BN2S0 ISDN card (1 TE - 1 NT). 

The all is working well, however I am unsure of how to configure the BN2S0 card port 2 (NT) to provide an S-Bus that additional ISDN phones can connect to as extensions. The phone is powering up OK and Asterisk is dectecting when the phone is taken off hook however I receive an error about Asterisk not knowing how to handle the call. 

As of yet, I have not configured any additional users in users.conf for the ISDN phone as Im not quite sure how to configure them to use that channel. 

Has anyone ever tried such a configuration here that might be able to give me a few pointers? Any and all help is much appreciated. 

Thanks. 

Kind Regards,
Steven Moughan
-------------------------------------------------
LAKE Communications,
Beech House, Greenhills Road,
Dublin 24, IRELAND
int. +353 1 4031112
fax. +353 1 452 0826
www.lakecommunications.com 
************************************************************************************
This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify mailadmin at lakecommunications.com
 
This footnote also confirms that this email message has been scanned for the presence of computer viruses and other security threats.
 
Registered Office: Lake Communications Ltd, Beech House, Greenhills Road, Dublin 24, Ireland.
Registered No. 59890
************************************************************************************