[asterisk-users] help with dahdi

[Hakan C]

Post your /etc/dahdi/system.conf and /etc/asterisk/chan_dahdi.conf

On Wed, Nov 19, 2008 at 3:16 PM, Jerry Geis <geisj at pagestation.com> wrote:

> >
> > >/
> > />/
> > />/ dahdi_dummy loads as shown.
> > />/
> > />/ When compiling asterisk 1.4.22 it compiles fine.
> > />/
> > />/ when running I get the message:
> > />/ ] ERROR[10981]: asterisk.c:3036 main: Asterisk has detected a problem
> > />/ with your DAHDI configuration and will shutdown for your protection.
> > />/ You have options:
> > />/         1. You only have to compile DAHDI support into Asterisk if
> you
> > />/ need it.  One option is to recompile without DAHDI support.
> > />/         2. You only have to load DAHDI drivers if you want to take
> > />/ advantage of DAHDI services.  One option is to unload DAHDI modules
> if
> > />/ you don't need them.
> > />/         3. If you need DAHDI services, you must correctly configure
> DAHDI.
> > />/
> > />/
> > />/ dahdi_speed gives:
> > />/ Count: 1782120
> > /
> > dahdi_speed is pointless.
> >
> > >/
> > />/ dahdi_test never somes back
> > /
> > DAHDI loaded. Device files exist. But nothing actually ticks.
> >
> Still investigating DAHDI...
>
>  more /proc/dahdi/1
> Span 1: DAHDI_DUMMY/1 "DAHDI_DUMMY/1 (source: RTC) 1" (MASTER)
>
>
> I did the following on suggestions from the list. Verified that the
> packages:
>
> gcc
> g++
> make
> libncurses5-dev
> flex
> bison
> patch
> linux-source
> linux-headers-$(uname -r)
>
> are indeed present on my system.
>
> service dahdi stop
> rm -rf /usr/include/dahdi
> rm -rf /lib/modules/2.6.18-92.el5/dahdi
> rm /etc/udev/rules.d/dahdi.rules
> remove my source tree for DAHDI.
> grabbed the linux-complete 2.0 again.
> extracted it.
> according to the readme in the complete package, I did the make all, make
> install, make config.
>
> then I rebooted.
>
>
> asterisk gives me the same error about DAHDI is misconfigured.
>  ERROR[9878]: asterisk.c:3036 main: Asterisk has detected a problem with
> your DAHDI configuration and will shutdown for your protection.  You
> have options:
>        1. You only have to compile DAHDI support into Asterisk if you
> need it.  One option is to recompile without DAHDI support.
>        2. You only have to load DAHDI drivers if you want to take
> advantage of DAHDI services.  One option is to unload DAHDI modules if
> you don't need them.
>        3. If you need DAHDI services, you must correctly configure DAHDI.
>
> the /proc/dahdi/1 shows its using the RTC
>
> Whats my next step.
>
> Jerry
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20081119/6a556a01/attachment.htm