[asterisk-users] AS5200 <-> T100P - No alarms but no calls either...

[Don Fanning]

No data is logged on the call.  Probably because the status is reporting 
"down"

*CLI> pri show span 1
Primary D-channel: 24
Status: Provisioned, Down, Active
Switchtype: National ISDN
Type: Network
Window Length: 0/7
Sentrej: 0
SolicitFbit: 0
Retrans: 0
Busy: 0
Overlap Dial: 0
T200 Timer: 1000
T203 Timer: 10000
T305 Timer: 30000
T308 Timer: 4000
T309 Timer: -1
T313 Timer: 4000
N200 Counter: 3

*CLI> pri debug span 1
Enabled debugging on span 1
*CLI> Sending Set Asynchronous Balanced Mode Extended
Sending Set Asynchronous Balanced Mode Extended
Sending Set Asynchronous Balanced Mode Extended
Sending Set Asynchronous Balanced Mode Extended
[....]

---
# Autogenerated by /usr/sbin/genzaptelconf -- do not hand edit
# Zaptel Configuration File
#
# This file is parsed by the Zaptel Configurator, ztcfg
#

# It must be in the module loading order


# Span 1: WCT1/0 "Digium Wildcard T100P T1/PRI Card 0" (MASTER)
span=1,0,0,esf,b8zs
# termtype: te
bchan=1-23
dchan=24

# Global data

loadzone        = us
defaultzone     = us
---
[channels]
language=en
context=internal
switchtype=national
signalling=pri_net
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1
immediate=no
busydetect=yes
callprogress=yes
channel => 1-23


Tzafrir Cohen wrote:
> On Tue, Nov 11, 2008 at 06:02:49PM -0800, Don Fanning wrote:
>   
>> Greetings,
>>
>> I have a AS5200 that I have interfaced to a T100P via a T-1 Crossover 
>> cable.  I got it where the alarms are all ok/green but I'm unable to 
>> dial out or dial into the AS5200.
>>
>> Anyone have any suggestions as to where to begin troubleshooting this?
>>     
>
> pri show span 1
>
> pri debug span 1
>
> And then see what happens on a call.
>
>