[asterisk-users] asterisk/E1
Khaled Chehab
Kchehab at Xplorium.com
Fri Nov 14 08:18:55 CST 2008
Dears
My hitch is that no alerts bombing out .all what is bombing out
Unable to open pid file '/var/run/asterisk/asterisk.pid': No such file or
directory
My modules.conf
;
; Asterisk configuration file
;
; Module Loader configuration file
;
[modules]
autoload=yes
noload => pbx_gtkconsole.so
load => res_musiconhold.so
noload => chan_alsa.so
asterisk.conf
[directories]
astetcdir => /etc/asterisk
astmoddir => /usr/lib/asterisk/modules
astvarlibdir => /var/lib/asterisk
astdatadir => /var/lib/asterisk
astagidir => /var/lib/asterisk/agi-bin
astspooldir => /var/spool/asterisk
astrundir => /var/run/asterisk
astlogdir => /var/log/asterisk
[options]
languageprefix = yes ; Use the new sound prefix path syntax
verbose = 9
debug = 9
alwaysfork = yes ; same as -F at startup
Please advice
Regards
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Steve Totaro
Sent: Friday, November 14, 2008 4:09 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] asterisk/E1
Start asterisk with "asterisk -vvvvvvvvv" and see where it is bombing out.
You could also check your Asterisk logs
Usually, some module is not loading or whatever, so you can either figure
out why or add noload=module in modules.conf.
If it is not a module, it will be pretty clear what it is when starting
Asterisk with the above command, then once fixed, safe_asterisk is a good
way to start Asterisk.
Thanks,
Steve Totaro
On Fri, Nov 14, 2008 at 8:57 AM, Khaled Chehab <Kchehab at xplorium.com> wrote:
Dear All
I tried to stop asterisk and start it with debugging ,kindly heck the
results
Already I modified asterisk.conf
astrundir => /var/run/asterisk
[root at localhost ~]# safe_asterisk
[root at localhost ~]# Asterisk ended with exit status 0
Asterisk shutdown normally.
[root at localhost ~]# asterisk -vvvvgc
Asterisk 1.4.22, Copyright (C) 1999 - 2008 Digium, Inc. and others.
Created by Mark Spencer <markster at digium.com>
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for
details.
This is free software, with components licensed under the GNU General Public
License version 2 and other licenses; you are welcome to redistribute it
under
certain conditions. Type 'core show license' for details.
=========================================================================
== Parsing '/etc/asterisk/asterisk.conf': Found
== Parsing '/etc/asterisk/extconfig.conf': Parsing
/etc/asterisk/extconfig.conf
Found
Unable to open pid file '/var/run/asterisk/asterisk.pid': No such file or
directory
Please advice.
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Godson Gera
Sent: Friday, November 14, 2008 3:34 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] asterisk/E1
On Fri, Nov 14, 2008 at 6:29 PM, Khaled Chehab <Kchehab at xplorium.com> wrote:
Dear All
I installed a Digium card TE405P with zaptel and its running successfully
with no alarms, but asterisk is not running .
Any one have a cure or advice
03:09.0 Communication controller: Digium, Inc. Wildcard TE405P quad-span
T1/E1/J1 card 5.0V (rev 02)
Nov 14 07:56:58 localhost kernel: wct4xxp: Clearing yellow alarm on span 2
Nov 14 07:56:58 localhost kernel: wct4xxp: Clearing yellow alarm on span 1
Nov 14 07:56:58 localhost kernel: Zaptel: Master changed to TE4/0/1
[root at localhost ~]# asterisk -rvvvvc
Asterisk 1.4.22, Copyright (C) 1999 - 2008 Digium, Inc. and others.
Created by Mark Spencer <markster at digium.com>
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for
details.
This is free software, with components licensed under the GNU General Public
License version 2 and other licenses; you are welcome to redistribute it
under
certain conditions. Type 'core show license' for details.
=========================================================================
== Parsing '/etc/asterisk/asterisk.conf': Found
== Parsing '/etc/asterisk/extconfig.conf': Parsing
/etc/asterisk/extconfig.conf
Found
Unable to connect to remote asterisk (does /var/run/asterisk/asterisk.ctl
exist?)
It says asterisk is not running, try running the following command 'asterisk
-vvvvgc' and see what happens. Also you need to use '-r' option only to
connect to an asterisk instance that is already running not to start
asterisk.
Godson Gera
http://godson.in
_____
*********************************************
No employee or agent is authorized to conclude any binding agreement on
behalf of Xplorium with another party by e-mail without express written
confirmation by an officer of Xplorium. Any views expressed by an individual
in this electronic message do not necessarily reflect views of Xplorium or
its subsidiaries and associates.
This electronic message and its attachments are solely addressed to the
addressee(s), and contain confidential information protected from disclosure
belonging to Xplorium.
If you are not the intended addressee of this electronic message and its
attachments, kindly delete it immediately from your system and notify the
sender by electronic mail. You must not copy this message or attachment or
disclose its content to any other person.
Xplorium does not guarantee the integrity of this electronic message and any
of its attachments, or that they are free from computer viruses or other
defects..
*********************************************
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
Thanks,
Steve Totaro
+18887771888 (Toll Free)
+12409381212 (Cell)
+12024369784 (Skype)
*********************************************
No employee or agent is authorized to conclude any binding agreement on behalf of Xplorium with another party by e-mail without express written confirmation by an officer of Xplorium. Any views expressed by an individual in this electronic message do not necessarily reflect views of Xplorium or its subsidiaries and associates.
This electronic message and its attachments are solely addressed to the addressee(s), and contain confidential information protected from disclosure belonging to Xplorium.
If you are not the intended addressee of this electronic message and its attachments, kindly delete it immediately from your system and notify the sender by electronic mail. You must not copy this message or attachment or disclose its content to any other person.
Xplorium does not guarantee the integrity of this electronic message and any of its attachments, or that they are free from computer viruses or other defects..
*********************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20081114/eaf530d4/attachment-0001.htm
More information about the asterisk-users
mailing list