[asterisk-users] console/dsp asterisk seg fault

[Jerry Geis]

Jerry Geis wrote:
>>
>> Get a core dump.
>>   
> Steve this is the stack trace.... still working on the dump.
>
> Program received signal SIGSEGV, Segmentation fault.
> [Switching to Thread -1229517920 (LWP 9875)]
> __ast_read (chan=0x8294a68, dropaudio=0) at channel.c:2016
> 2016                    f = AST_LIST_REMOVE_HEAD(&chan->readq, 
> frame_list);
> (gdb) where
> #0  __ast_read (chan=0x8294a68, dropaudio=0) at channel.c:2016
> #1  0x080a30a9 in ast_channel_bridge (c0=0x8297620, c1=0x8294a68, 
> config=0xb6b6b090, fo=0xb6b6aba0, rc=0xb6b6aba4) at channel.c:2305
> #2  0xb7f38b7d in ast_bridge_call (chan=0x8297620, peer=0x8294a68, 
> config=0xb6b6b090) at res_features.c:1420
> #3  0xb6cadd10 in dial_exec_full (chan=0x8297620, data=Variable "data" 
> is not available.
> ) at app_dial.c:1706
> #4  0xb6cb0c94 in dial_exec (chan=0x8294a68, data=0x8294a68) at 
> app_dial.c:1760
> #5  0x0810daa0 in pbx_extension_helper (c=0x8297620, con=Variable 
> "con" is not available.
> ) at pbx.c:532
> #6  0x08116637 in __ast_pbx_run (c=0x8297620) at pbx.c:2306
> #7  0x081193d0 in pbx_thread (data=0x8297620) at pbx.c:2623
> #8  0x081568fc in dummy_start (data=0x8288888) at utils.c:852
> #9  0x002d53cc in start_thread () from /lib/tls/libpthread.so.0
> #10 0x0022d96e in clone () from /lib/tls/libc.so.6
>
> ztdummy is loaded.
> Module                  Size  Used by
> ztdummy                 4152  0
> zaptel                186792  13 
> ztdummy,xpp,wcusb,wctdm,wcfxo,wctdm24xxp,wcte11xp,wct1xxp,wcte12xp,wct4xxp,tor2 
>
> crc_ccitt               2440  1 zaptel
>
>
Does this make a difference ?
 zttest
Opened pseudo zap interface, measuring accuracy...
99.969147% 99.883011% 99.987312% 99.901176% 99.986137% 99.892593% 
99.987885%
99.987206% 99.865631% 99.984863% 99.891907% 99.978897% 99.894623% ^C
--- Results after 13 passes ---
Best: 99.988 -- Worst: 99.866 -- Average: 99.939261, Difference: 99.944007

Jerry