[asterisk-users] console/dsp asterisk seg fault

[Jerry Geis]

I am using zaptel 1.4.12.1 and asterisk 1.4.18 - I also tried 1.4.21

lspci shows
00:00.0 Host bridge: VIA Technologies, Inc. VT8623 [Apollo CLE266]
00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP]
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 
Controller (rev 80)
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. 
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:11.5 Multimedia audio controller: VIA Technologies, Inc. 
VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] 
(rev 74)
01:00.0 VGA compatible controller: VIA Technologies, Inc. VT8623 [Apollo 
CLE266] integrated CastleRock graphics (rev 03)

When I call into Console/dsp sometimes it works and sometimes asterisk 
seg faults.


 more /proc/interrupts
           CPU0      
  0:     164343    XT-PIC-XT        timer
  1:          2    XT-PIC-XT        i8042
  2:          0    XT-PIC-XT        cascade
  4:          1    XT-PIC-XT        serial
  5:      29363    XT-PIC-XT        VIA8233
  6:          3    XT-PIC-XT        floppy
  7:          1    XT-PIC-XT     
  8:     589515    XT-PIC-XT        rtc
 10:       2357    XT-PIC-XT        ehci_hcd:usb1
 11:      20748    XT-PIC-XT        uhci_hcd:usb2, eth0
 12:          4    XT-PIC-XT        i8042
 14:       7597    XT-PIC-XT        ide0
NMI:          0   Non-maskable interrupts
LOC:          0   Local timer interrupts
TRM:          0   Thermal event interrupts
SPU:          0   Spurious interrupts
ERR:          1
MIS:          0


the rtc values does increment...

Any ideas? I am running centos 4 i386.

Jerry