[asterisk-users] analog issues using xen virtualization

[Jesus Lee]

hi folks,

i have a issue with my setup.

i recently install xen in my server, and create several
domu, but when i start a domU or i am working in it,
my fxs in my tdm400p have noise. when i am calling
from iax or sip extension trough the fxo there not noise, it
just with the fxs port and domU working at same time

i check for electrical problems and all its good.

i have the following setup:


software in DOM0:
centos 5.2
kernel 2.6.18-53.1.19.el5xen
asterisk 1.4.22-rc5
zaptel-1.4.11
xen-3.0.3-64.el5_2.3

hardware:
tdm400p 1 fxs + 1 fxo -------- installed in DOM0


installed domUs: centos 5.2 kernel 2.6.18-92.1.17.el5xen 


FXS /etc/asterisk/zapata.conf -extract-
-------------------------------------------------------------

[channels]
context=from-pstn
signalling=fxs_ks
rxwink=300              
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
faxdetect=incoming
echotraining=800
rxgain=0.0
txgain=0.0
callgroup=1
pickupgroup=1



-------------------------------------------------------------

thanks


Open Systems - innovate, create, enjoy 
____________________________

jesuslee at gmail dot com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20081110/a4e8b5db/attachment.htm