[asterisk-users] Asking again about busylevel

[Jim Dickenson]

I sent this email a few days ago but did not see any responses to it:

> I am running asterisk 1.6.0.1. I have a Grandstream GXP280 phone I use for
> testing. In addition I register a zoiper SIP soft phone.
> 
> For the Grandstream I have busylevel=1 in sip.conf.
> 
> If I place a call from the GXP280 to zoiper and then put that call on hold
> from the zoiper side and then call GXP280's extension, asterisk indicates the
> phone is ringing. As the GXP280 is a single line phone it does not ring the
> second call. I would have expected the call to get a busy as I have busylevel
> set to one. I have tried setting busylevel to two as well with the same
> result.
> 
> Can someone let me know what I should look at to see why I am not getting a
> busy instead of ringing?
> 
> Here are the definitions in sip.conf for the GXP280 and zoiper:
> 
> [dickenson]
> type=friend
> context=empl
> nat=yes
> host=dynamic
> secret=<password>
> callerid=Jim Dickenson <108>
> mailbox=108 at ourvm
> 
> [GXP280]
> type=friend
> context=empl
> host=dynamic
> secret=<password>
> callerid=GXP280 <109>
> mailbox=109 at ourvm
> busylevel=1



I am wondering if anyone has been able to get a busy when calling a SIP
phone. I seem to just get a no answer returned.
-- 
Jim Dickenson
mailto:dickenson at cfmc.com

CfMC
http://www.cfmc.com/