[asterisk-users] AEL NoOp not working

[Atis Lezdins]

On Wed, Nov 5, 2008 at 5:28 PM, Olivier <oza-4h07 at myamail.com> wrote:
>
>
> 2008/11/5 Atis Lezdins <atis at iq-labs.net>
>>
>> On Wed, Nov 5, 2008 at 12:39 PM, Olivier <oza-4h07 at myamail.com> wrote:
>> > Hi,
>> >
>> > I've new to http://www.voip-info.org/wiki/view/Asterisk+AEL2
>> >
>> > I'm using NoOp and Verbose functions inside extensions.ael.
>> > Strangely, NoOp is not printing anything in Asterisk console while
>> > Verbose
>> > is working.
>> > Am I missing something obvious ?
>>
>> Hi,
>>
>> NoOp is not outputting anything, it's just "does nothing", however you
>> should still be able to see "Executing NoOp("blablabla")" in console,
>> as it's a command.
>
> Yes, that's the point : I don't see anything in console (I wasn't expecting
> anything else to happen).
> Strange ...

Ok, i played with this, and seems that "Executing ... " lines are
shown in CLI only on verbose level 3 or higher.

So, either start asterisk with "asterisk -vvv" or issue "core set
verbose 3" in CLI.

Regards,
Atis

-- 
Atis Lezdins,
VoIP Project Manager / Developer,
atis at iq-labs.net
Skype: atis.lezdins
Cell Phone: +371 28806004
Cell Phone: +1 800 7300689
Work phone: +1 800 7502835