[asterisk-users] Cisco Gateway sending call to * without CID Name

[Andrew Joakimsen]

On Fri, May 30, 2008 at 5:47 PM, JR Richardson <jmr.richardson at gmail.com> wrote:

> Just so we are all on the same page, here is my setup:
>
> legacyPBX> PRI <Cisco2600GW> SIP <Asterisk> SIP <PSTN
>
> I was able to debug isdn on the GW, there is no CID name coming from
> the PBX to the GW on the PRI.  I do see the CID Name from asterisk to
> the GW to the PRI.

Then the issue is the PBX.

> Now the CID Name is coming into asterisk in the first SIP invite.  I
> realize this is only good in this setup because it's only 1 customer
> so I can set the name statically and not be concerned about what, if
> anything, they send to me on the PRI.  If this were a PSTN GW, I would
> still be screwed I think.

If the provider is sending the name info I think you would be fine.