[asterisk-users] Calling '**1' through Asterisk

[Matt Watson]

Might want to do a "sip set debug peer <peer id>"

You should then be able to see the sip packet dumps that are going between the phone and *.  Might give you some clues.

--
Matt
http://www.mattgwatson.ca


-----Original Message-----
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Henrik Ostergaard Madsen
Sent: Wednesday, May 28, 2008 12:54 PM
To: asterisk-users at lists.digium.com
Subject: [asterisk-users] Calling '**1' through Asterisk

I am experiencing problems calling '**1' through astrisk from an VOIP
telephone. Asterisk appearently does not accept the call and never show
any indication of an incoming call (using asterisk -rvvvvvvvvvvvvvvvvvv).
On the phone, I get an immideate 'Call ended'. This occurs on both an
Linksysy SPA941 and an LIP TA100. The same happens with '**'

Using '**11' or '*1' or '*11' instead, the call gets right through..

I can see on tcpdump that the SIP packages does reach the asterisk server
and gets answered.

Does anyone have a clue on what is going on?

Regards

Henrik
-----------------------------------------------------------
Henrik ¥stergaard Madsen        Phone: +45 44 48 44 92
PhD, M.Sc.                      Cell:  +45 30 94 02 88
Mosegard Park 42                email: Henrik at Ostergaard.net
DK-3500 Værl¢se                 WWW homepage:
Denmark                                 http://www.Ostergaard.net/Henrik





_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users