[asterisk-users] reload stopping EVERYTHING on CLI and causing havoc.

Mark Hamilton mark.h at cage151.com
Thu May 22 14:25:04 CDT 2008


Thanks Steve.
Using 1.4.18, and I don't think it's fixed.
The unresponsiveness is permanent - although I do try to not reload during
work hours, sometimes it's just necessary.. especially when someone asks for
a new queue.

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Steve Totaro
Sent: May 22, 2008 3:12 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] reload stopping EVERYTHING on CLI and causing
havoc.

On Thu, May 22, 2008 at 2:02 PM, Sherwood McGowan
<sherwood.mcgowan at gmail.com> wrote:
> Mark Hamilton wrote:
>>
>> Hi,
>>
>> Yesterday I made a change in queues.conf and so tried doing a reload
>> app_queue.so in the CLI. (Using 1.4.18). It didn't seem to do
>> anything, infact all action on CLI stopped.
>>
>> Then, I did a reload. Same thing.
>>
>> After that there was no other way.. because even stop now wouldn't
>> work, so I did a service asterisk restart
>>
>> And then asterisk kept giving the same thing on prompt "Died
>> successfully" and all that it usually says when you issue a stop now,
>> except it kept showing that on root prompt after doing a service
>> asterisk restart.
>>
>> Did a killall asterisk, and finally it stopped.
>>
>> Then started asterisk service. It was fine.
>>
>> Did a full restart at night, and it was fine.
>>
>> NOW, I wanted to do a reload again today mid-day when in full use, and
>> it still didn't work, and ALL of the above happened again.
>>
>> --
>>
>> How do I diagnose what's causing this?
>>
>> Thanks,
>>
>> Mark.
>>
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
> I've had this problem before, haven't debugged it. I definitely look
> forward to hearing what is said about this.
>
> Example from my recent experience, I wanted to restart the server and so
> did
>
> pbx0*CLI> restart now
>
> But nothing happened...system continued to allow calls to take place.
> I've found that sometimes exiting and reconnecting to the CLI helps, but
> there have been a couple occasions where NOTHING would allow the server
> to restart save for a reboot. Even killall asterisk didn't kill the
> process....
>
> Sherwood McGowan
>

You are using Asterisk 1.2.x?  I have seen this many, many times.

Sometimes the CLI becomes unresponsive, sometimes queues crap out or
stops delivering calls to agents, sometimes it just takes a bit and
then becomes responsive again.

The rule of thumb is don't reload queues when there are people in
queue, at least that seems to eliminate the problems I have seen.
Makes sense too.

Not sure if it is fixed in 1.4.

Thanks,
Steve Totaro

_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users




More information about the asterisk-users mailing list