[asterisk-users] *72 Telco Call Forwarding

[Matt Watson]

Is there any reason you don't want to use Wait()?

However, I would use WaitForRing() myself - its also a great solution on dirty analog lines where you receive "phantom calls".

That being said, I don't know how to do it without using some form of Wait.. as far as I know zapata.conf doesn't provide a method of telling Asterisk to wait for a specific period of time or rings
--
Matt

From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Jeremy Mann
Sent: Thursday, May 15, 2008 12:07 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: [asterisk-users] *72 Telco Call Forwarding

Is there a way to force asterisk to ignore the first ring of a call without using Wait() ?

When I active *72 call forward on my analog lines from the telco, they always send a single ring and then do the forwarding.  Asterisk picks up essentially a dead line and rings the phones which gets really annoying.

Thanks.

________________________________
This e-mail, facsimile, or letter and any files or attachments transmitted with it contains information that is confidential and privileged. This information is intended only for the use of the individual(s) and entity(ies) to whom it is addressed. If you are the intended recipient, further disclosures are prohibited without proper authorization. If you are not the intended recipient, any disclosure, copying, printing, or use of this information is strictly prohibited and possibly a violation of federal or state law and regulations. If you have received this information in error, please notify Texas Health Management Group immediately at 1-817-310-4999. Texas Health Management Group, its subsidiaries, and affiliates hereby claim all applicable privileges related to this information.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080515/8dcec5cb/attachment.htm