[asterisk-users] Asterisk stops MOH on transfer

[Steve Davies]

2008/5/13 Stefan Schmidt <sst at sil.at>:
> Hello,
>
>  i´ve a problem i dont find the reason for. An incoming call coming over
>  iax is connected to a Sip phone. Until the phone picks up the call i
>  could hear moh without problems. Then the phone sets the call on hold
>  and opens another call to another extension. The incoming call hears the
>  Hold music and also the call to the other extension hears another moh.
>  Everything works so far as it should.
>
>  Now the two calls are transfered so the incoming call is switched to the
>  other extension. At this point the Moh on both channels stops which
>  should be. The incoming call should hear the moh, or a ringing, but just
>  silence.
>
>  i do the dial command with the m option.
>
>  i could paste logs if necessary.
>
>  The version which runs here is a Asterisk 1.2.26.2 and a realtime
>  configuration.
>

I found the same issue, and a similar issue with transferring a call
received out of a queue. Both issues exist in 1.2, and a friend of
mine kindly re-checked this and found that it was fixed/changed in 1.4

Regards,
Steve