[asterisk-users] Ubuntu 8.04 + Astribank
Loic DIDELOT
ldidelot at mixvoip.com
Fri May 9 02:38:04 CDT 2008
Hello,
I am sorry to drop in with maybe a dump question. I got my Xorcomm bank
(8 fxs) and I try to get it working on ubuntu without success. I was
looking for a step by step instruction which I could not find. I found
the "insert the CD and now it works manual" but thats not what I am
looking for.
So here is what I did:
- downloaded zaptel 1.4.10, comile and install
- plug the usb device
Here is the point where I am lost. So I tried a few things:
- zaptel_hardware
usb:008/007 xpp_usb- e4e4:1131 Astribank-8/16 USB-firmware
- /usr/share/zaptel/xpp_fxloader load
--------- FIRMWARE LOADING: (load) [1 devices]
Got all 1 devices
/usr/sbin/fpga_load: ERROR (487): Wrong number of endpoints: 2
/usr/sbin/fpga_load: ERROR (749): Failed to initialize USB device
'/dev/bus/usb/008/007'
'xpp_fxloader'[14506]: FPGA Firmware into /dev/bus/usb/008/007
/usr/sbin/fpga_load: ERROR (487): Wrong number of endpoints: 2
/usr/sbin/fpga_load: ERROR (749): Failed to initialize USB device
'/dev/bus/usb/008/007'
'xpp_fxloader'[14513]: /usr/share/zaptel/FPGA_FXS.hex: Version=5480
Checksum=40245
[: 259: 0: unexpected operator
.......................................
- /usr/share/zaptel/xpp_fxloader usb
--------- FIRMWARE LOADING: (usb) [1 devices]
Got all 1 devices
--------- FIRMWARE IS LOADED
- /etc/init.d/zaptel start
Loading zaptel framework: done.
Waiting for zap to come online...OK
Loading zaptel hardware modules: tor2.
wct4xxp.
wcte12xp.
wct1xxp.
wcte11xp.
wctdm24xxp.
wcfxo.
wctdm.
wcusb.
xpp_usb.
No functioning zap hardware found in /proc/zaptel, loading ztdummy
Running ztcfg: done.
So why cant I see my device in /proc/xpp or /proc/zaptel. What did I
miss?
Best regards,
Loic Didelot.
On Thu, 2008-05-08 at 20:31 -0300, Guilherme Loch Waltrick Góes wrote:
> Runnig the xpp_fxloader before the Zaptel and Asterisk scripts solves
> the problem.
>
>
> thank you Tzafir.
>
> On Thu, May 8, 2008 at 11:07 AM, Tzafrir Cohen
> <tzafrir.cohen at xorcom.com> wrote:
>
> On Thu, May 08, 2008 at 08:33:08AM -0300, Guilherme Loch
> Waltrick Góes wrote:
> > Tzafir,
> > It's not working it, here's what the utilities told me:
> >
> > root at asterisk:~# invoke-rc.d asterisk stop
> > * Stopping Asterisk PBX: asterisk
> > ...done.
> > root at asterisk:~# invoke-rc.d zaptel stop
> > Unloading zaptel hardware drivers:.
> > root at asterisk:~# /usr/share/zaptel/xpp_fxloader usb
> > --------- FIRMWARE LOADING: (usb) [1 devices]
> > 'xpp_fxloader'[6583]: USB
> Firmware /usr/share/zaptel/USB_FW.hex into
> > /dev/bus/usb/005/003
> > ..Got all 1 devices
> > --------- FIRMWARE IS LOADED
> > root at asterisk:~# mount procbususb /proc/bus/usb -t usbfs
> > root at asterisk:~# grep usb /proc/filesystems
> > nodev usbfs
> > root at asterisk:~# zaptel_hardware
> > usb:005/004 xpp_usb- e4e4:1151 Astribank-multi
> USB-firmware
> > root at asterisk:~# lsusb
> > Bus 005 Device 004: ID e4e4:1151
> > Bus 005 Device 002: ID 058f:6362 Alcor Micro Corp. Hi-Speed
> 21-in-1 Flash
> > Card Reader/Writer (Internal/External)
> > Bus 005 Device 001: ID 0000:0000
> > Bus 004 Device 001: ID 0000:0000
> > Bus 003 Device 001: ID 0000:0000
> > Bus 002 Device 001: ID 0000:0000
> > Bus 001 Device 001: ID 0000:0000
>
>
> It means firmware has failed to load automatically. This
> still needs
> some debugging. To manually load the firmware:
>
> /usr/share/zaptel/xpp_fxloader load
>
> Then look is lsusb. After you see there "52", re-run
>
> /etc/init.d/zaptel start
>
>
> > root at asterisk:~# invoke-rc.d zaptel restart
> > Unloading zaptel hardware drivers:.
> > Loading zaptel framework: done.
> > Waiting for zap to come online...OK
> > Loading zaptel hardware modules: tor2.
> > wct4xxp.
> > wcte12xp.
> > wct1xxp.
> > wcte11xp.
> > wctdm24xxp.
> > wcfxo.
> > wctdm.
> > wcusb.
> > xpp_usb.
> > No functioning zap hardware found in /proc/zaptel, loading
> ztdummy
> > Running ztcfg: done.
> > root at asterisk:~# genzaptelconf
> > root at asterisk:~# cat /etc/zaptel.conf
> > # Autogenerated by /usr/sbin/genzaptelconf -- do not hand
> edit
> > # Zaptel Configuration File
> > #
> > # This file is parsed by the Zaptel Configurator, ztcfg
> > #
> >
> > # It must be in the module loading order
> >
> >
> > # Span 1: ZTDUMMY/1 "ZTDUMMY/1 (source: HRtimer) 1" (MASTER)
> >
> > # Global data
> >
> > loadzone = us
> > defaultzone = us
> >
> > Any hints ? What else can I do ?
> >
> > Best Regards,
> >
> > On Wed, May 7, 2008 at 4:23 PM, Tzafrir Cohen
> <tzafrir.cohen at xorcom.com>
> > wrote:
> >
> > > On Wed, May 07, 2008 at 01:03:53PM -0300, Guilherme Loch
> Waltrick Góes
> > > wrote:
> > > > I'm using Zaptel 1.4.10 compiled from source, it's an
> Astribank with
> > > > 6FXS+2FXO here's the output of some commands:
> > > > root at asterisk:~# invoke-rc.d asterisk stop
> > > > * Stopping Asterisk PBX: asterisk
> > > > ...done.
> > > > root at asterisk:~# invoke-rc.d zaptel restart
> > > > Unloading zaptel hardware drivers:.
> > > > Loading zaptel framework: done.
> > > > Waiting for zap to come online...OK
> > > > Loading zaptel hardware modules: tor2.
> > > > wct4xxp.
> > > > wcte12xp.
> > > > wct1xxp.
> > > > wcte11xp.
> > > > wctdm24xxp.
> > > > wcfxo.
> > > > wctdm.
> > > > wcusb.
> > > > xpp_usb.
> > > > No functioning zap hardware found in /proc/zaptel,
> loading ztdummy
> > > > Running ztcfg: done.
> > > > root at asterisk:~# lsusb
> > > > Bus 005 Device 003: ID e4e4:1150
> > > > Bus 005 Device 002: ID 058f:6362 Alcor Micro Corp.
> Hi-Speed 21-in-1 Flash
> > > > Card Reader/Writer (Internal/External)
> > > > Bus 005 Device 001: ID 0000:0000
> > > > Bus 004 Device 001: ID 0000:0000
> > > > Bus 003 Device 001: ID 0000:0000
> > > > Bus 002 Device 001: ID 0000:0000
> > > > Bus 001 Device 001: ID 0000:0000
> > > > root at asterisk:~# zaptel_hardware
> > > > root at asterisk:~#
> > >
> > > I think that this is because they no longer mount usbfs by
> default and
> > > we rely on it for some details of the perl utilities.
> > >
> > > fxload and fpgaload, OTOH, do not rely on it. Make sure
> you have the
> > > package "fxload" installed and disconnect / reconnect the
> Astribank
> > > (or run '/usr/share/zaptel/xpp_fxloader usb').
> > >
> > > To mount usbfs:
> > >
> > > mount procbususb /proc/bus/usb -t usbfs
> > >
> > > (to see if it is available: 'grep usb /proc/filesystems')
> > >
> > > But I think that apart from zaptel_hardware, our other
> utilities do not
> > > rely on /proc/bus/usb and should work well.
> > >
> > > --
> > > Tzafrir Cohen
>
> > > icq#16849755
> jabber:tzafrir.cohen at xorcom.com<jabber%
> 3Atzafrir.cohen at xorcom.com>
>
> > > +972-50-7952406 mailto:tzafrir.cohen at xorcom.com
> > > http://www.xorcom.com iax:guest at local.xorcom.com/tzafrir
> > >
> > > _______________________________________________
> > > -- Bandwidth and Colocation Provided by
> http://www.api-digital.com --
> > >
> > > asterisk-users mailing list
> > > To UNSUBSCRIBE or update options visit:
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
> >
> >
> >
> > --
> > Guilherme Loch Góes
> >
> > Visite nossa loja virtual: http://www.shopvoip.com.br
> >
> > Notícias e Fórum sobre VoIP com software livre:
> > http://www.asteriskexperts.com.br
>
> > _______________________________________________
> > -- Bandwidth and Colocation Provided by
> http://www.api-digital.com --
> >
> > asterisk-users mailing list
> > To UNSUBSCRIBE or update options visit:
> > http://lists.digium.com/mailman/listinfo/asterisk-users
>
> --
> Tzafrir Cohen
> icq#16849755 jabber:tzafrir.cohen at xorcom.com
> +972-50-7952406 mailto:tzafrir.cohen at xorcom.com
> http://www.xorcom.com iax:guest at local.xorcom.com/tzafrir
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by
> http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
>
> --
> Guilherme Loch Góes
>
> Visite nossa loja virtual: http://www.shopvoip.com.br
>
> Notícias e Fórum sobre VoIP com software livre:
> http://www.asteriskexperts.com.br
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
--
Loïc DIDELOT
MIXvoip S.a.
ldidelot at mixvoip.com
http://www.mixvoip.com
More information about the asterisk-users
mailing list