[asterisk-users] Cisco 7965 SIP Firmware

[Greg Oliver]

On Mon, 2008-03-31 at 23:07 +0100, Razza wrote:
> On 31/03/2008, J. Oquendo <sil at infiltrated.net> wrote: 
>         YMMV Change to reflect your firmware (e.g. P003-07-4-xx)
>  
> 8<-------- SNIP -------->8
>  
> I removed the following lines:
> <loadInformation8 model="IP Phone
> 7940">P003-07-4-00</loadInformation8>
> <loadInformation7 model="IP Phone
> 7960">P003-07-4-00</loadInformation7>
> 
> And tried both of these:
> <loadInformation6 model="IP Phone
> 7965">term65.default</loadInformation6>
> and
> <loadInformation6 model="IP Phone
> 7965">SIP45.8-3-4SR1S</loadInformation6>
> 
> But again I get no further than /var/log/messages showing in.tftp
> stops sending after XMLDefault.cnf.xml
> 
> Any suggestions? 

For a 7965, you might try loadinformation to be 335..  I have had to
match up CCM tk.prod values to match on newer phones in the past to be
what cisco uses in their internal database before I could get them to
work.  Although, leaving those lines out completely will work as well
assuming they already have the SIP firmware loaded..

-Greg