[asterisk-users] CCM 6 and Asterisk routing again

[Aaron Fransen]

One interesting thing:

If I call the Cisco system from the Aastra 57i connected to Asterisk, then
pick up the Cisco it works.

I then hit the "CONFRN" button on the Cisco and dial my cell phone, then hit
"CONFRN" again to conference in, the Asterisk log shows that it puts me on
"music on hold" and never takes me off again.

Odd?

On Tue, Mar 11, 2008 at 6:11 AM, Aaron Fransen <aaron.fransen at gmail.com>
wrote:

>
> Running Cisco Call Manager 6.1 and Asterisk 1.4. CCM is connected to a T1,
> Asterisk is running strictly VoIP over the network and using CCM as the
> trunk.
>
> Calls from the SIP phones connected to Asterisk work fine. They can call
> both external numbers and any Cisco extensions attached to CCM.
>
> Calls from CCM to Asterisk fail without any notification in Asterisk (and
> I DID have this working at one point, but I suspect that our Telco may have
> pooched the config somehow, since they're in the process of connecting us to
> another CCM site).
>
> I have verified: Media Termination point exists, Calling Search Space
> exists, Trunk is properly defined (uLaw 711, UDP, ip address & port, etc),
> and a route pattern exists to take calls to the right trunk.
>
> The system will let me complete the dialing sequence to the Asterisk
> server, but as soon as I enter the last digit I get a busy signal.
>
> Thoughts anyone?
>
> Here's my sip.conf if that helps...
>
> [callman]
> type=peer
> context=incoming
> insecure=very
> host=(ip of my call manager server)
> disallow=all
> allow=ulaw
> allow=alaw
> nat=no
> canreinvite=yes
> qualify=yes
>
> Thanks! Aaron
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080311/b2ccd7b0/attachment.htm