[asterisk-users] CCM 6 and Asterisk routing again

[Peter Pauly]

I've noticed two differences in what you described and my working CM setup:

1. My sip trunk in CM is defined as 711alaw, you have ulaw.

2. My sip.conf defines CM as a type=friend instead of a peer.

Do you have any SIP phones connected to Asterisk (you could use a
softphone like the free xten)? Can you call the phone from
CallManager?

Peter Pauly
http://www.usbtests.com


On 3/11/08, Aaron Fransen <aaron.fransen at gmail.com> wrote:
>
> Running Cisco Call Manager 6.1 and Asterisk 1.4. CCM is connected to a T1,
> Asterisk is running strictly VoIP over the network and using CCM as the
> trunk.
>
> Calls from the SIP phones connected to Asterisk work fine. They can call
> both external numbers and any Cisco extensions attached to CCM.
>
> Calls from CCM to Asterisk fail without any notification in Asterisk (and I
> DID have this working at one point, but I suspect that our Telco may have
> pooched the config somehow, since they're in the process of connecting us to
> another CCM site).
>
> I have verified: Media Termination point exists, Calling Search Space
> exists, Trunk is properly defined (uLaw 711, UDP, ip address & port, etc),
> and a route pattern exists to take calls to the right trunk.
>
>  The system will let me complete the dialing sequence to the Asterisk
> server, but as soon as I enter the last digit I get a busy signal.
>
> Thoughts anyone?
>
> Here's my sip.conf if that helps...
>
> [callman]
>  type=peer
> context=incoming
> insecure=very
> host=(ip of my call manager server)
> disallow=all
> allow=ulaw
> allow=alaw
> nat=no
> canreinvite=yes
> qualify=yes
>
> Thanks! Aaron
>
> _______________________________________________
>  -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
>  asterisk-users mailing list
>  To UNSUBSCRIBE or update options visit:
>
> http://lists.digium.com/mailman/listinfo/asterisk-users
>