[asterisk-users] Newbie dialplan: dial 0 for outside line

[Bruce Reeves]

John,

Try changing the entry in extensions.conf to Dial(Zap/g1/0). you need
to specify what the dial command should send on the ZAP channel.

On Tue, Mar 4, 2008 at 10:51 PM, Lee, John (Sydney)
<John.Lee at compuware.com> wrote:
> I just managed to put in a TE410 card in an Asterisk box to work with
>  OnRamp 20(E1 downunder). I am able to dial in but was not able to dial
>  out.
>
>  Can anyone offer me some advice please?
>
>  In my extensions.conf, I just put in:
>
>  [default]
>  ...
>  exten => 0,1,Dial(Zap/g1)
>
>  and I get this on the console when I dialled 0.
>
>  -- Executing [0 at default:1] Dial("SIP/5166-b76004f8", "Zap/g1") in new
>  stack
>  -- Requested transfer capability: 0x00 - SPEECH
>  -- Called g1LI>
>  -- Channel 0/1, span 1 got hangup, cause 100
>  -- Hungup 'Zap/1-1'
>  [Mar 5 15:37:01] NOTICE[10479]: cdr.c:434 ast_cdr_free: CDR on channel
>  'Zap/1-1' not posted
>  == Everyone is busy/congested at this time (1:0/0/1)
>  == Auto fallthrough, channel 'SIP/5166-b76004f8' status is 'CHANUNAVAIL'
>
>  The following is my set up:
>  ----------------------------------- -----------------
>  # vi /etc/zaptel.conf
>  span=1,1,0,ccs,hdb3,crc4
>  bchan=1-15
>  bchan=17-21
>  unused=22-31
>  dchan=16
>  loadzone=au
>  defaultzone=au
>  ----------------------------------- -----------------
>  [channels]
>  language=en
>  context=default
>
>  switchtype=euroisdn
>  pridialplan=unknown
>  prilocaldialplan=unknown
>  overlapdial=yes
>  priindication=outofband
>
>  signalling=pri_cpe
>
>  rxwink=300
>  usecallerid=yes
>  hidecallerid=no
>  callwaiting=yes
>  usecallingpres=yes
>  callwaitingcallerid=yes
>  restrictcid=no
>  usecallingpres=yes
>  callwaitingcallerid=yes
>  threewaycalling=yes
>  transfer=yes
>  canpark=yes
>  cancallforward=yes
>  callreturn=yes
>
>  echocancel=yes
>  echocancelwhenbridged=yes
>  echotraining=yes
>
>  rxgain=-3.0
>  txgain=-6.0
>
>  callgroup=1
>  pickupgroup=1
>  immediate=no
>
>  group=1
>  channel => 1-15
>  channel => 17-21
>  ----------------------------------- -----------------
>  *CLI> pri show spans
>  PRI span 1/0: Provisioned, Up, Active
>  ----------------------------------- -----------------
>  *CLI> zap show channels
>  Chan Extension Context Language MOH Interpret
>  pseudo default en default
>  1 default en default
>  2 default en default
>  ...
>  14 default en default
>  15 default en default
>  17 default en default
>  ...
>  20 default en default
>  21 default en default
>  ----------------------------------- -----------------
>  # cat /proc/zaptel/1
>  Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" HDB3/CCS/CRC4
>  Timing slips: 556
>
>  1 TE4/0/1/1 Clear (In use)
>  2 TE4/0/1/2 Clear (In use)
>  ...
>  15 TE4/0/1/15 Clear (In use)
>  16 TE4/0/1/16 HDLCFCS (In use)
>  17 TE4/0/1/17 Clear (In use)
>  ...
>  21 TE4/0/1/21 Clear (In use)
>  22 TE4/0/1/22 Clear
>  ...
>  31 TE4/0/1/31 Clear
>
>  _______________________________________________
>  -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
>  asterisk-users mailing list
>  To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>



-- 
Bruce Reeves