[asterisk-users] TDM400P dialout problem

[Martin]

A simple inrease of DEFAULT_BATT_DEBOUNCE to 32 (originally 4) work for 
me... Probably a nasty hack but allows me to dial....
(I also need DEFAULT_RING_DEBOUNCE increased to 256 to minimize problems 
with caller ID, which is right above)
Martin

> My incoming calls work just fine with 1.4.9.2 and TDM400P but I'm 
> completely
> unable to dial out the line.
> even this doesn't work:
> exten=>*903,1,Answer()
> exten=>*903,n,Dial(Zap/3)
> exten=>*903,n,Hangup()
>
> I use this to pick up the line shared with analog phone. Zap/3 and Zap/4 
> are
> connected to PSTN. Sometimes I have luck with Zap/3 but not a single call
> through Zap/4
>
> -- Executing [*903 at Martin:1] Answer("SIP/210-081e9968", "") in new stack
> -- Executing [*903 at Martin:2] Dial("SIP/210-081e9968", "Zap/3") in new 
> stack
> -- Called 3
> [2008-03-02 09:43:17] WARNING[5051]: chan_zap.c:4114 zt_handle_event:
> Detected alarm on channel 3: No Alarm
> -- Hungup 'Zap/3-1'
> == Everyone is busy/congested at this time (1:0/0/1)