[asterisk-users] Asterisk 1.4.21 stalls?

[Patrick]

Hi Remco,

On Fri, 2008-06-20 at 09:33 +0200, Remco Barendse wrote:
> Ip upgraded yesterday from Asterisk 1.4.20.1 to 1.4.21

I did the same yesterday.

> The update seems to work ok, when asterisk is started all is fine.

Yup.

> However after some time it is not possible to call anymore, my Snom 
> display simply shows Not available and incoming calls from the PRI fail, 
> like the PRI is not connected.

That's not good at all.

> Reverting back to 1.4.20.1 solves the problem.
> 
> I tried re-installing and re-compiling 1.4.21 and all the modules several 
> times, didn't help.
> 
> Anyone else seeing this?

Nope but on this 1.4.21 box I am using an Eicon Diva Server card and
that has always worked rock solid.

Make sure you start Asterisk with -g so it can dump core, set
appropriate values for ulimit and log everything (logger.conf). Maybe
you will then get more info what's going on.

Good luck!

Regards,
Patrick