[asterisk-users] Trouble with PRI config

[Michael Collins]

You'll probably need to turn on pri debugging for this span and then
capture the output from when you connect the T1 cable.  That might yield
some clues, like whether or not any activity is happening on the
d-channel and if so, if there are any errors that might tell you what's
going on.

-MC

 

________________________________

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Eve-Ellen
Cole
Sent: Thursday, June 19, 2008 12:39 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: Re: [asterisk-users] Trouble with PRI config

 

Right again, getting a little closer (babysteps) ... no alarms on either
system, but when I check the pri status in the CLI, I get PRI span 2/0:
Provisioned, Down, Active.  I've searched for clues, but am not coming
up with the next step.

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Steve
Totaro
Sent: Thursday, June 19, 2008 1:41 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Trouble with PRI config

pri_net usually when connecting to a legacy system.

Thanks,
Steve T

On Thu, Jun 19, 2008 at 1:38 PM, Eve-Ellen Cole
<ecole at mail.plymouth.edu> wrote:
> The underscore helped, but didn't resolve the real issue.  Now I get
the
> following messages:
>
> [Jun 19 13:36:15] WARNING[4288] chan_zap.c: PRI Error on span 0: We
think
> we're the CPE, but they think they're the CPE too.
>
> [Jun 19 13:36:16] WARNING[4288] chan_zap.c: No D-channels available!
Using
> Primary channel 48 as D-channel anyway!
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Steve
Totaro
> Sent: Thursday, June 19, 2008 1:12 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [asterisk-users] Trouble with PRI config
>
> Try underscore _ rather than dash -
>
> Thanks,
> Steve T
>
> On Thu, Jun 19, 2008 at 12:51 PM, Eve-Ellen Cole
> <ecole at mail.plymouth.edu> wrote:
>> I'm trying to connect Asterisk 1.4.20 to Avaya Definity G3R v11.1 via
a T1
>> crossover, and I'm currently stuck.  Anyone have any thoughts on what
I
>> can
>> do to get past this?
>>
>> Asterisk side
>>
>> Digium TE220B w/ green LED (using port 2)
>>
>> Zaptel.conf
>>
>>   span=2,1,0,esf,b8zs
>>
>>   bchan=25-47
>>
>>   dchan=48
>>
>>   loadzone = us
>>
>>   defaultzone=us
>>
>> Zapata.conf
>>
>>   context=default
>>
>>   switchtype=national
>>
>>   ; T1 PRI to Avaya Definity G3R
>>
>>   context=from_pbx
>>
>>   signalling=pri-cpe
>>
>>   group=3
>>
>>   channel => 25
>>
>> Avaya side
>>
>> TN464GP
>>
>> Ds1 01C14
>>
>>   Framing mode: esf
>>
>>   Line coding: b8zs
>>
>>   Signaling mode: isdn-pri
>>
>>   Connect: Network
>>
>>   Protocol version: b (national)
>>
>>   Near-end CSU type: other (for the T1 crossover)
>>
>> Signaling group 6
>>
>>   Primary d-channel set to 01C14
>>
>> When I restart Asterisk, the following lines get logged to
>> /var/log/asterisk/messages:
>>
>> [Jun 19 12:41:37] ERROR[28093] chan_zap.c: Unknown signalling method
>> 'pri-cpe'
>>
>> [Jun 19 12:41:37] ERROR[28093] chan_zap.c: Signalling must be
specified
>> before any channels are.
>>
>> If I change signaling method to pri-net:
>>
>> [Jun 19 12:49:42] ERROR[28184] chan_zap.c: Unknown signalling method
>> 'pri-net'
>>
>> [Jun 19 12:49:42] ERROR[28184] chan_zap.c: Signalling must be
specified
>> before any channels are.
>>
>> _______________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> AstriCon 2008 - September 22 - 25 Phoenix, Arizona
>> Register Now: http://www.astricon.net
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> AstriCon 2008 - September 22 - 25 Phoenix, Arizona
> Register Now: http://www.astricon.net
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> AstriCon 2008 - September 22 - 25 Phoenix, Arizona
> Register Now: http://www.astricon.net
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>

_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

AstriCon 2008 - September 22 - 25 Phoenix, Arizona
Register Now: http://www.astricon.net

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080619/47b1489b/attachment.htm