[asterisk-users] Trouble with PRI config

[Steve Totaro]

pri_net usually when connecting to a legacy system.

Thanks,
Steve T

On Thu, Jun 19, 2008 at 1:38 PM, Eve-Ellen Cole <ecole at mail.plymouth.edu> wrote:
> The underscore helped, but didn't resolve the real issue.  Now I get the
> following messages:
>
> [Jun 19 13:36:15] WARNING[4288] chan_zap.c: PRI Error on span 0: We think
> we're the CPE, but they think they're the CPE too.
>
> [Jun 19 13:36:16] WARNING[4288] chan_zap.c: No D-channels available!  Using
> Primary channel 48 as D-channel anyway!
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Steve Totaro
> Sent: Thursday, June 19, 2008 1:12 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [asterisk-users] Trouble with PRI config
>
> Try underscore _ rather than dash -
>
> Thanks,
> Steve T
>
> On Thu, Jun 19, 2008 at 12:51 PM, Eve-Ellen Cole
> <ecole at mail.plymouth.edu> wrote:
>> I'm trying to connect Asterisk 1.4.20 to Avaya Definity G3R v11.1 via a T1
>> crossover, and I'm currently stuck.  Anyone have any thoughts on what I
>> can
>> do to get past this?
>>
>> Asterisk side
>>
>> Digium TE220B w/ green LED (using port 2)
>>
>> Zaptel.conf
>>
>>   span=2,1,0,esf,b8zs
>>
>>   bchan=25-47
>>
>>   dchan=48
>>
>>   loadzone = us
>>
>>   defaultzone=us
>>
>> Zapata.conf
>>
>>   context=default
>>
>>   switchtype=national
>>
>>   ; T1 PRI to Avaya Definity G3R
>>
>>   context=from_pbx
>>
>>   signalling=pri-cpe
>>
>>   group=3
>>
>>   channel => 25
>>
>> Avaya side
>>
>> TN464GP
>>
>> Ds1 01C14
>>
>>   Framing mode: esf
>>
>>   Line coding: b8zs
>>
>>   Signaling mode: isdn-pri
>>
>>   Connect: Network
>>
>>   Protocol version: b (national)
>>
>>   Near-end CSU type: other (for the T1 crossover)
>>
>> Signaling group 6
>>
>>   Primary d-channel set to 01C14
>>
>> When I restart Asterisk, the following lines get logged to
>> /var/log/asterisk/messages:
>>
>> [Jun 19 12:41:37] ERROR[28093] chan_zap.c: Unknown signalling method
>> 'pri-cpe'
>>
>> [Jun 19 12:41:37] ERROR[28093] chan_zap.c: Signalling must be specified
>> before any channels are.
>>
>> If I change signaling method to pri-net:
>>
>> [Jun 19 12:49:42] ERROR[28184] chan_zap.c: Unknown signalling method
>> 'pri-net'
>>
>> [Jun 19 12:49:42] ERROR[28184] chan_zap.c: Signalling must be specified
>> before any channels are.
>>
>> _______________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> AstriCon 2008 - September 22 - 25 Phoenix, Arizona
>> Register Now: http://www.astricon.net
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> AstriCon 2008 - September 22 - 25 Phoenix, Arizona
> Register Now: http://www.astricon.net
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> AstriCon 2008 - September 22 - 25 Phoenix, Arizona
> Register Now: http://www.astricon.net
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>