[asterisk-users] Trouble with PRI config

[Steve Totaro]

Try underscore _ rather than dash -

Thanks,
Steve T

On Thu, Jun 19, 2008 at 12:51 PM, Eve-Ellen Cole
<ecole at mail.plymouth.edu> wrote:
> I'm trying to connect Asterisk 1.4.20 to Avaya Definity G3R v11.1 via a T1
> crossover, and I'm currently stuck.  Anyone have any thoughts on what I can
> do to get past this?
>
> Asterisk side
>
> Digium TE220B w/ green LED (using port 2)
>
> Zaptel.conf
>
>   span=2,1,0,esf,b8zs
>
>   bchan=25-47
>
>   dchan=48
>
>   loadzone = us
>
>   defaultzone=us
>
> Zapata.conf
>
>   context=default
>
>   switchtype=national
>
>   ; T1 PRI to Avaya Definity G3R
>
>   context=from_pbx
>
>   signalling=pri-cpe
>
>   group=3
>
>   channel => 25
>
> Avaya side
>
> TN464GP
>
> Ds1 01C14
>
>   Framing mode: esf
>
>   Line coding: b8zs
>
>   Signaling mode: isdn-pri
>
>   Connect: Network
>
>   Protocol version: b (national)
>
>   Near-end CSU type: other (for the T1 crossover)
>
> Signaling group 6
>
>   Primary d-channel set to 01C14
>
> When I restart Asterisk, the following lines get logged to
> /var/log/asterisk/messages:
>
> [Jun 19 12:41:37] ERROR[28093] chan_zap.c: Unknown signalling method
> 'pri-cpe'
>
> [Jun 19 12:41:37] ERROR[28093] chan_zap.c: Signalling must be specified
> before any channels are.
>
> If I change signaling method to pri-net:
>
> [Jun 19 12:49:42] ERROR[28184] chan_zap.c: Unknown signalling method
> 'pri-net'
>
> [Jun 19 12:49:42] ERROR[28184] chan_zap.c: Signalling must be specified
> before any channels are.
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> AstriCon 2008 - September 22 - 25 Phoenix, Arizona
> Register Now: http://www.astricon.net
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>