[asterisk-users] Using Asterisk Only as Voice Recording Solution.

[Syed Nasruddin]

HI,

 

I am using TDM800P Digium Card with Asterisk 1.4.* version. I have fair
command over Asterisk up till now and have run it in different scenarios
such as Call Center Solution, PBX solution.

 

There is a requirement to use Asterisk only as Voice Recording solution
in following manner:

 

1.	Physical POT lines before entering into our native PBX will be
splitted and one of each of those lines will also enter into our
Asterisk System. 
2.	Once the call is routed by our native PBX and recipient picks up
the phone (either SIP phone or Analog Phone) I should be able to start
recording the call. 
3.	When the call ends, the recording should stop. 

 

Problem being faced by me is this that I am able to catch the call in my
diaplan and initialize MixMonitor but since my diaplan never detects
OFF-HOOK/ON_HOOK condition it continue to wait and finally hang-up while
in actual the call is running through our PBX.

 

Is there any channel variable or any other mechanism by which I can
accomplish this task? Since i will not be using any Dial() or similar
application I will be needing some kind of OFF-HOOK trigger/Event in my
dialplan.

 

Your help will be highly appreciated.

 

regards

 

Syed Nasruddin

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080612/ad783247/attachment.htm