[asterisk-users] Problems configuring a PRI...

[Tzafrir Cohen]

On Tue, Jun 10, 2008 at 04:22:40PM -0500, Christopher Hoff wrote:
> I'm trying to get a Qwest PRI configured and working with my lab
> Asterisk server. They said that the switchtype is 5ess and the signaling
> is pri_cpe. My entries into zaptel.conf are: 
> 
> span=1,0,0,esf,b8zs 
> bchan=1-23 
> dchan=24 
> loadzone = us 
> defaultzone=us 
> channels=1-23 

Remove this line, please . "channels" is a valid zaptel.conf line, but
will configure those channels for use with pciradio. IIRC
'channels=1-23' is an invalid line.

> 
> 
> And my entries in zapata.conf are: 
> 
> language=en 
> context=telco-incoming 
> switchtype=5ess 
> signalling=pri_cpe 
> rxwink=300 
> usecallerid=yes 
> hidecallerid=no 
> callwaiting=no 
> usecallingpres=yes 
> callwaitingcallerid=yes 
> threewaycalling=yes 
> transfer=yes 
> canpark=yes 
> cancallforward=yes 
> callreturn=yes 
> echocancel=yes 
> echocancelwhenbridged=yes 
> rxgain=0.0 
> txgain=0.0 
> callgroup=1 
> pickupgroup=1 
> immediate=no 
> group = 1 
> switchtype = 5ess 
> signalling = pri_cpe 
> group = 1 
> channel => 1-23 
> 
> I'm not able to make/receive calls, and the error I'm receiving is: 
> 
> [Jun 10 11:32:37] WARNING[31768]: chan_zap.c:2393 pri_find_dchan: No
> D-channels available! Using Primary channel 24 as D-channel anyway! 
> == Primary D-Channel on span 1 down 
> 
> Qwest says that the PRI is fine. I have a green light on the PRI card. 

What do you see in 'cat /proc/zaptel/*' ?

Have you run ztcfg after editing zaptel.conf ?

-- 
               Tzafrir Cohen
icq#16849755              jabber:tzafrir.cohen at xorcom.com
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir