[asterisk-users] Help-ASTERISK-MFCR2

[Steve Underwood]

Mariano Borgognone wrote:
> Moises, we've already set debug level at 255 on unicall.conf and at
> logger.conf we've enabled full log (notice,warning,error,debug,verbose).
>
> Has anyone experienced with a Siemens EWSD switch?
> Anyone knows about to change R2 timers at unicall.conf ?
>
> Please any comment is welcome, thank you..
> Mariano.-
>   
Randomly changing timers won't help. A call came in at 16:02:18, and 
your box should have responded almost immediately with a "seize ack" 
signal. It actually responded with this signal 12 seconds later 
(16:02:30). You haven't shown enough logging to get much of a clue why.
>
> ----- Original Message ----- 
> From: "Moises Silva" <moises.silva at gmail.com>
> To: "Asterisk Users Mailing List - Non-Commercial Discussion" 
> <asterisk-users at lists.digium.com>
> Sent: Saturday, June 07, 2008 1:27 PM
> Subject: Re: [asterisk-users] Help-ASTERISK-MFCR2
>
>
> You need to enable loglevel=255 in unicall.conf and enable all the
> levels of logging in logger.conf, otherwise the logs you post don't
> say much.
>
> Moisés Silva
>
> On Fri, Jun 6, 2008 at 2:58 PM, Mariano Borgognone
> <mborgognone at wilsonsa.com.ar> wrote:
>   
>> Dears,
>> I have problem ASTERISK with PSTN SIEMENS EWSD (MFC R2), I don´t receive
>> call for PSTN, i don´t understand why..... please i need your help !!!!
>>
>> # MFC/R2 normalmente no usa CRC4
>> span=1,1,0,cas,hdb3
>> cas=1-15:1101
>> dchan=16
>> cas=17-31:1101
>> loadzone=us
>> defaultzone=us
>>
>>
>>  [channels]
>> usecallerid=yes
>> hidecallerid=no
>> callwaitingcallerid=yes
>> threewaycalling=yes
>> transfer=yes
>> cancallforward=yes
>> callreturn=yes
>> echocancel=yes
>> echocancelwhenbridged=yes
>> echotraining=yes
>> rxgain=0.0
>> txgain=0.0
>> group=1
>> callgroup=1
>> pickupgroup=1
>> immediate=no
>> musiconhold=default
>> protocolclass=mfcr2
>> protocolvariant=ar,10,10
>> protocolend=cpe
>> group = 1
>> context= e1-incoming
>> channel => 1-15
>> channel => 17-31
>> ;skip time slot 16
>>
>>
>>
>> Here is the LOGS when I try do make calls
>>
>> Jun  6 16:02:18 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2
>> UniCall/1      <- 0001  [1/       1/Idle          /Idle         ]
>> Jun  6 16:02:18 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2
>> UniCall/1 Detected
>> Jun  6 16:02:18 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2
>> UniCall/1 Making a new call with CRN 32769
>> Jun  6 16:02:18 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2
>> UniCall/1 1101  ->      [2/       2/Idle          /Idle         ]
>> Jun  6 16:02:18 WARNING[5060]: chan_unicall.c:2644 handle_uc_event:
>> Unicall/1 event Detected
>> Jun  6 16:02:30 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2
>> UniCall/1      <- 1001  [2/       2/Seize ack     /Seize ack    ]
>> Jun  6 16:02:30 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2
>> UniCall/1 Far end disconnected(cause=Normal, unspecified cause [31]) - 
>> state
>> 0x2
>> Jun  6 16:02:30 WARNING[5060]: chan_unicall.c:2644 handle_uc_event:
>> Unicall/1 event Far end disconnected
>> Jun  6 16:02:30 WARNING[5060]: chan_unicall.c:2930 handle_uc_event: CRN
>> 32769 - far disconnected cause=Normal, unspecified cause [31]
>> Jun  6 16:02:30 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2
>> UniCall/1 Call control(6)
>> Jun  6 16:02:30 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2
>> UniCall/1 Drop call(cause=Normal Clearing [16])
>> Jun  6 16:02:30 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2
>> UniCall/1 Call disconnected(cause=Normal, unspecified cause [31]) - state
>> 0x800
>> Jun  6 16:02:30 WARNING[5060]: chan_unicall.c:2644 handle_uc_event:
>> Unicall/1 event Drop call
>> Jun  6 16:02:30 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2
>> UniCall/1 Call control(7)
>> Jun  6 16:02:30 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2
>> UniCall/1 Release call
>> Jun  6 16:02:30 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2
>> UniCall/1 1001  ->      [1/    1000/Clear fwd     /Seize ack    ]
>> Jun  6 16:02:30 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2
>> UniCall/1 Release guard expired
>> Jun  6 16:02:30 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2
>> UniCall/1 Destroying call with CRN 32769
>> Jun  6 16:02:30 WARNING[5060]: chan_unicall.c:2644 handle_uc_event:
>> Unicall/1 event Release call
>>     -- Unicall/1 released
>> Jun  6 16:02:30 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2
>> UniCall/1 Channel echo cancel
>>     
Regards,
Steve