[asterisk-users] Help-ASTERISK-MFCR2

Mon Jun 9 17:04:43 CDT 2008

Mariano:

   Could you send us please the log files, and the console output... so we
can help you.

On Mon, Jun 9, 2008 at 8:01 AM, Mariano Borgognone <
mborgognone at wilsonsa.com.ar> wrote:

> Moises, we've already set debug level at 255 on unicall.conf and at
> logger.conf we've enabled full log (notice,warning,error,debug,verbose).
>
> Has anyone experienced with a Siemens EWSD switch?
> Anyone knows about to change R2 timers at unicall.conf ?
>
> Please any comment is welcome, thank you..
> Mariano.-
>
>
> ----- Original Message -----
> From: "Moises Silva" <moises.silva at gmail.com>
> To: "Asterisk Users Mailing List - Non-Commercial Discussion"
> <asterisk-users at lists.digium.com>
> Sent: Saturday, June 07, 2008 1:27 PM
> Subject: Re: [asterisk-users] Help-ASTERISK-MFCR2
>
>
> You need to enable loglevel=255 in unicall.conf and enable all the
> levels of logging in logger.conf, otherwise the logs you post don't
> say much.
>
> Moisés Silva
>
> On Fri, Jun 6, 2008 at 2:58 PM, Mariano Borgognone
> <mborgognone at wilsonsa.com.ar> wrote:
> >
> > Dears,
> > I have problem ASTERISK with PSTN SIEMENS EWSD (MFC R2), I don´t receive
> > call for PSTN, i don´t understand why..... please i need your help !!!!
> >
> > # MFC/R2 normalmente no usa CRC4
> > span=1,1,0,cas,hdb3
> > cas=1-15:1101
> > dchan=16
> > cas=17-31:1101
> > loadzone=us
> > defaultzone=us
> >
> >
> >  [channels]
> > usecallerid=yes
> > hidecallerid=no
> > callwaitingcallerid=yes
> > threewaycalling=yes
> > transfer=yes
> > cancallforward=yes
> > callreturn=yes
> > echocancel=yes
> > echocancelwhenbridged=yes
> > echotraining=yes
> > rxgain=0.0
> > txgain=0.0
> > group=1
> > callgroup=1
> > pickupgroup=1
> > immediate=no
> > musiconhold=default
> > protocolclass=mfcr2
> > protocolvariant=ar,10,10
> > protocolend=cpe
> > group = 1
> > context= e1-incoming
> > channel => 1-15
> > channel => 17-31
> > ;skip time slot 16
> >
> >
> >
> > Here is the LOGS when I try do make calls
> >
> > Jun  6 16:02:18 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2
> > UniCall/1      <- 0001  [1/       1/Idle          /Idle         ]
> > Jun  6 16:02:18 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2
> > UniCall/1 Detected
> > Jun  6 16:02:18 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2
> > UniCall/1 Making a new call with CRN 32769
> > Jun  6 16:02:18 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2
> > UniCall/1 1101  ->      [2/       2/Idle          /Idle         ]
> > Jun  6 16:02:18 WARNING[5060]: chan_unicall.c:2644 handle_uc_event:
> > Unicall/1 event Detected
> > Jun  6 16:02:30 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2
> > UniCall/1      <- 1001  [2/       2/Seize ack     /Seize ack    ]
> > Jun  6 16:02:30 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2
> > UniCall/1 Far end disconnected(cause=Normal, unspecified cause [31]) -
> > state
> > 0x2
> > Jun  6 16:02:30 WARNING[5060]: chan_unicall.c:2644 handle_uc_event:
> > Unicall/1 event Far end disconnected
> > Jun  6 16:02:30 WARNING[5060]: chan_unicall.c:2930 handle_uc_event: CRN
> > 32769 - far disconnected cause=Normal, unspecified cause [31]
> > Jun  6 16:02:30 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2
> > UniCall/1 Call control(6)
> > Jun  6 16:02:30 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2
> > UniCall/1 Drop call(cause=Normal Clearing [16])
> > Jun  6 16:02:30 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2
> > UniCall/1 Call disconnected(cause=Normal, unspecified cause [31]) - state
> > 0x800
> > Jun  6 16:02:30 WARNING[5060]: chan_unicall.c:2644 handle_uc_event:
> > Unicall/1 event Drop call
> > Jun  6 16:02:30 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2
> > UniCall/1 Call control(7)
> > Jun  6 16:02:30 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2
> > UniCall/1 Release call
> > Jun  6 16:02:30 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2
> > UniCall/1 1001  ->      [1/    1000/Clear fwd     /Seize ack    ]
> > Jun  6 16:02:30 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2
> > UniCall/1 Release guard expired
> > Jun  6 16:02:30 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2
> > UniCall/1 Destroying call with CRN 32769
> > Jun  6 16:02:30 WARNING[5060]: chan_unicall.c:2644 handle_uc_event:
> > Unicall/1 event Release call
> >     -- Unicall/1 released
> > Jun  6 16:02:30 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2
> > UniCall/1 Channel echo cancel
> >
> > Best Regards,
> > Mariano Borgognone
> > _______________________________________________
> > -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> >
> > asterisk-users mailing list
> > To UNSUBSCRIBE or update options visit:
> >   http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>
>
>
> --
> "I do not agree with what you have to say, but I'll defend to the
> death your right to say it." Voltaire
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>

-- 
Alvaro I. Parres Peredo
Director de IT
Grupo Xmarts SA de CV
Tel: +52 (33) 35 63 6261 Ext. 112
01 800 087 2260
Cel: +52 (33) 33 68 1087
alvaro.parres at xmarts.com.mx
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080609/6d569f04/attachment.htm 