[asterisk-users] Fax on FXS

[Jason Aarons (US)]

While not on the FXS port itself other things to look for;

1) set the fax machine to disable Super G3 (33.3k), try to force it to
use G3 (14.4k).

2) set the fax machine to Disable ECM (Error Correction Mode)

3) If PSTN is T1 check span for errors, etc.

4) Some protocols have fax-passthrough and modem-relay 

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Matt
Watson
Sent: Saturday, June 07, 2008 1:00 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Fax on FXS

On June 7, 2008 11:37:20 am bilal ghayyad wrote:
> Hi List;
>
> What configuration needed to let my FXS send and
> receive FAX?
>

Your probably going to need to give some more details about your setup
before 
anybody can help you... theres really nothing special you need to
configure 
for an FXS port to attach a fax machine to it...

keep in mind that faxing over VoIP is extremely tricky at best, but if
your 
entire call path is TDM then you shouldn;t have much of a problem.

-- 
Matt Watson
http://www.mattgwatson.ca

_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.