[asterisk-users] Asterisk not picking up incoming calls from TDM400P
Drew Gibson
drew at oanda.com
Fri Jun 6 13:53:55 CDT 2008
It's the thought that counts! :-)
Tim Nelson wrote:
> You are correct... my mistake. :-/
>
> Tim Nelson
> Systems/Network Support
> Rockbochs Inc.
> (218)727-4332 x105
>
> ----- Original Message -----
> From: "Drew Gibson" <drew at oanda.com>
> To: "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users at lists.digium.com>
> Sent: Friday, June 6, 2008 1:36:13 PM GMT -06:00 US/Canada Central
> Subject: Re: [asterisk-users] Asterisk not picking up incoming calls from TDM400P
>
> Nope, didn't help.
>
> Doesn't the context declaration come *before* the channel assignment in
> zapata.conf?
> It's working that way in our main Asterisk server.
>
> regards,
>
> Drew
>
>
>
> Tim Nelson wrote:
>
>> It looks like you may be missing a context declaration right after your "channel => 1" line. Try adding "context=incoming" right after that.
>>
>> Tim Nelson
>> Systems/Network Support
>> Rockbochs Inc.
>> (218)727-4332 x105
>>
>> ----- Original Message -----
>> From: "Drew Gibson" <drew at oanda.com>
>> To: "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users at lists.digium.com>
>> Sent: Friday, June 6, 2008 12:37:47 PM GMT -06:00 US/Canada Central
>> Subject: [asterisk-users] Asterisk not picking up incoming calls from TDM400P
>>
>> Hi,
>>
>> I am having some issues with a new server install in Singapore.
>>
>> Outbound calls work fine.
>>
>> Inbound calls are not picked up by Asterisk.
>>
>> Zaptel 1.2.25 and Asterisk 1.2.28 both built from source.
>> libpri installed
>>
>> wctdm and zaptel load without error
>>
>> Jun 6 23:34:03 fs01 kernel: [211138.372933] Zapata Telephony Interface
>> Registered on major 196
>> Jun 6 23:34:03 fs01 kernel: [211138.372937] Zaptel Version: 1.2.25
>> Jun 6 23:34:03 fs01 kernel: [211138.372943] Zaptel Echo Canceller: KB1
>> Jun 6 23:34:03 fs01 kernel: [211138.383639] Freshmaker version: 73
>> Jun 6 23:34:03 fs01 kernel: [211138.384053] Freshmaker passed register test
>> Jun 6 23:34:04 fs01 kernel: [211139.076180] Module 0: Installed -- AUTO
>> FXO (FCC mode)
>> Jun 6 23:34:04 fs01 kernel: [211139.275847] Module 1: Installed -- AUTO
>> FXO (FCC mode)
>> Jun 6 23:34:04 fs01 kernel: [211139.475514] Module 2: Installed -- AUTO
>> FXO (FCC mode)
>> Jun 6 23:34:05 fs01 kernel: [211139.675182] Module 3: Installed -- AUTO
>> FXO (FCC mode)
>> Jun 6 23:34:05 fs01 kernel: [211139.682518] Found a Wildcard TDM:
>> Wildcard TDM400P REV I (4 modules)
>> Jun 6 23:34:08 fs01 kernel: [211142.686305] Registered tone zone 18
>> (Singapore)
>> Jun 6 23:34:14 fs01 kernel: [211149.412565] -- Setting echo registers:
>> Jun 6 23:34:14 fs01 kernel: [211149.412990] -- Set echo registers
>> successfully
>> Jun 6 23:34:14 fs01 kernel: [211149.413005] -- Setting echo registers:
>> Jun 6 23:34:14 fs01 kernel: [211149.413426] -- Set echo registers
>> successfully
>> Jun 6 23:34:14 fs01 kernel: [211149.413435] -- Setting echo registers:
>> Jun 6 23:34:14 fs01 kernel: [211149.413848] -- Set echo registers
>> successfully
>> Jun 6 23:34:14 fs01 kernel: [211149.413861] -- Setting echo registers:
>> Jun 6 23:34:14 fs01 kernel: [211149.414276] -- Set echo registers
>> successfully
>> Jun 6 23:34:28 fs01 kernel: [211163.107241] Zaptel Transcoder support
>> loaded
>>
>>
>> The one and only POTS line has been tuned with "fxotune and "fxotune -s"
>> has been run.
>> ztmonitor shows incoming ring (volume peaks at 3-4000)
>>
>> No, nothing, nadda, zero response from Asterisk.
>>
>> Can anyone suggest a tool to help find the gap between zaptel and Asterisk?
>>
>> regards,
>>
>> Drew
>>
>>
>> zaptel.conf:-
>>
>> fxsks=1-4
>> ;(have tried fxsls=1-4 but no difference)
>> loadzone=sg
>> defaultzone=sg
>>
>>
>> zapata.conf:-
>>
>> [channels]
>> group=1
>> context=incoming
>> callprogress=no
>> rxgain=2.0
>> txgain=0.0
>> immediate=no
>> usecallerid=yes
>> callerid=asreceived
>> signalling=fxs_ks
>> relaxdtmf=yes
>> pickupgroup=1
>> faxdetect=incoming
>>
>> channel => 1
>>
>>
>> indications.conf:-
>>
>> [general]
>> country=sg
>>
>> <---- Other countries snipped --->
>>
>> [sg]
>>
>> ; Singapore section borrowed from
>> http://csusap.csu.edu.au/~whaase01/itc308/asterisk/indications.conf
>> description = Singapore
>> ; Singapore
>> ; Reference:
>> http://www.ida.gov.sg/idaweb/doc/download/I397/ida_ts_pstn1_i4r2.pdf
>> ; Frequency specs are: 425 Hz +/- 20Hz; 24 Hz +/- 2Hz; modulation
>> depth 100%; SIT +/- 50Hz
>> ringcadence = 400,200,400,2000
>> dial = 425
>> ring = 425*24/400,0/200,425*24/400,0/2000 ; modulation should
>> be 100%, not 90%
>> busy = 425/750,0/750
>> congestion = 425/250,0/250
>> callwaiting = 425*24/300,0/200,425*24/300,0/3200
>> stutter =
>> !425/200,!0/200,!425/600,!0/200,!425/200,!0/200,!425/600,!0/200,!425/200,!0/200,!425/600,!0/200,!425/200,!0/200,!425/600,!0/200,425
>> info = 950/330,1400/330,1800/330,0/1000 ; not currently in
>> use acc. to reference
>> dialrecall = 425*24/500,0/500,425/500,0/2500 ; unspecified in
>> IDA reference, use repeating Holding Tone A,B
>> record = 1400/500,0/15000 ; unspecified in
>> IDA reference, use 0.5s tone every 15s
>> ; additionally defined in reference
>> nutone = 425/2500,0/500
>> intrusion = 425/250,0/2000
>> warning = 425/624,0/4376 ; end of period
>> tone, warning
>> acceptance = 425/125,0/125
>> holdinga = !425*24/500,!0/500 ; followed by holdingb
>> holdingb = !425/500,!0/2500
>>
>>
>> [incoming]
>> ; Added Answer statement for troubleshooting
>> exten => s,1,Answer()
>>
>> include => office-incoming
>> include => internal
>>
>> [office-incoming]
>> ; OANDA Office incoming calls
>> ignorepat => 9
>> exten => s,1,Wait,1 ; Waiting a little longer for CID
>> exten => s,n,Answer ; Answer the line
>> exten => s,n,Set(TIMEOUT(digit)=2)
>> exten => s,n,Set(TIMEOUT(response)=10)
>> exten => s,n,Set(TIMEOUT(absolute)=14400)
>> ;exten => s,n,Goto(ivr_menu)
>>
>> <----- rest of extensions.conf snipped ----->
>>
>>
>>
>
>
>
--
Drew Gibson
Systems Administrator
OANDA Corporation
www.oanda.com
More information about the asterisk-users
mailing list