[asterisk-users] Trouble with unicall
Carlos Chavez
cursor at telecomabmex.com
Mon Jun 2 10:16:51 CDT 2008
Eraqse the dchan=16 line from the zaptel.conf (on the new configuration
they gave you). I find that that line breaks newer Unicall configs (it
used to work). Unicall will fail to load complaining that it cannot
find channel 16.
On Sun, 2008-06-01 at 21:55 -0300, Alejandro Fernandez wrote:
> Dear Alvaro
>
> In my zaptel.conf file I configured as:
> span=1,1,0,ccs,hdb3
> bchan=1-15,17-31
> dchan=16
>
> I changed with the value you told me, but still the same message
> error.
>
> Alejandro
>
>
> 2008/6/1 Alvaro Parres <aparres at gmail.com>:
> Alejandro:
>
> I think that you problem is at /etc/zaptel.conf file...
> becouse you config you card as CCS/HDB3, that configuration
> normaly is for data or isdn connections.
>
> Try setting as CAS,HDB3.... an example of the file can be:
>
>
> span=1,1,0,cas,hdb3
> cas=1-15:1101
> dchan=16
> cas=17-31:1101
>
>
>
>
> On Sun, Jun 1, 2008 at 5:37 PM, Alejandro Fernandez
> <allcontrol at gmail.com> wrote:
>
>
>
> Dear List Pal
>
> I have downloaded your astunicall-1.4.18-0.2.tar.gz file and I followed
>
>
> carefully your step.
> Every step went with out any problem.
> Beside this I have a Digium TE122P card as a E1 digital trame.
>
> I live in Argentina.
> When I issue ztcfg -vv it show me:
>
> Zaptel Version: 1.4.9.2
> Echo Canceller: MG2
> Configuration
> ======================
>
> SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
>
>
>
>
> Channel map:
>
> Channel 01: Clear channel (Default) (Slaves: 01)
> Channel 02: Clear channel (Default) (Slaves: 02)
> Channel 03: Clear channel (Default) (Slaves: 03)
> Channel 04: Clear channel (Default) (Slaves: 04)
>
>
>
> Channel 05: Clear channel (Default) (Slaves: 05)
> Channel 06: Clear channel (Default) (Slaves: 06)
> Channel 07: Clear channel (Default) (Slaves: 07)
> Channel 08: Clear channel (Default) (Slaves: 08)
> Channel 09: Clear channel (Default) (Slaves: 09)
>
>
>
> Channel 10: Clear channel (Default) (Slaves: 10)
> Channel 11: Clear channel (Default) (Slaves: 11)
> Channel 12: Clear channel (Default) (Slaves: 12)
> Channel 13: Clear channel (Default) (Slaves: 13)
> Channel 14: Clear channel (Default) (Slaves: 14)
>
>
>
> Channel 15: Clear channel (Default) (Slaves: 15)
> Channel 16: D-channel (Default) (Slaves: 16)
> Channel 17: Clear channel (Default) (Slaves: 17)
> Channel 18: Clear channel (Default) (Slaves: 18)
> Channel 19: Clear channel (Default) (Slaves: 19)
>
>
>
> Channel 20: Clear channel (Default) (Slaves: 20)
> Channel 21: Clear channel (Default) (Slaves: 21)
> Channel 22: Clear channel (Default) (Slaves: 22)
> Channel 23: Clear channel (Default) (Slaves: 23)
> Channel 24: Clear channel (Default) (Slaves: 24)
>
>
>
> Channel 25: Clear channel (Default) (Slaves: 25)
> Channel 26: Clear channel (Default) (Slaves: 26)
> Channel 27: Clear channel (Default) (Slaves: 27)
> Channel 28: Clear channel (Default) (Slaves: 28)
> Channel 29: Clear channel (Default) (Slaves: 29)
>
>
>
> Channel 30: Clear channel (Default) (Slaves: 30)
> Channel 31: Clear channel (Default) (Slaves: 31)
>
> 31 channels to configure.
>
> cat /proc/zaptel/1:
>
> Span 1: WCT1/0 "Wildcard TE122 Card 0" (MASTER) HDB3/CCS RED
>
>
>
> IRQ misses: 29
>
> 1 WCT1/0/1 Clear
> 2 WCT1/0/2 Clear
> 3 WCT1/0/3 Clear
> 4 WCT1/0/4 Clear
> 5 WCT1/0/5 Clear
> 6 WCT1/0/6 Clear
> 7 WCT1/0/7 Clear
>
>
>
> 8 WCT1/0/8 Clear
> 9 WCT1/0/9 Clear
> 10 WCT1/0/10 Clear
> 11 WCT1/0/11 Clear
> 12 WCT1/0/12 Clear
> 13 WCT1/0/13 Clear
> 14 WCT1/0/14 Clear
>
>
>
> 15 WCT1/0/15 Clear
> 16 WCT1/0/16 HDLCFCS
> 17 WCT1/0/17 Clear
> 18 WCT1/0/18 Clear
> 19 WCT1/0/19 Clear
> 20 WCT1/0/20 Clear
> 21 WCT1/0/21 Clear
>
>
>
> 22 WCT1/0/22 Clear
> 23 WCT1/0/23 Clear
> 24 WCT1/0/24 Clear
> 25 WCT1/0/25 Clear
> 26 WCT1/0/26 Clear
> 27 WCT1/0/27 Clear
> 28 WCT1/0/28 Clear
>
>
>
> 29 WCT1/0/29 Clear
> 30 WCT1/0/30 Clear
> 31 WCT1/0/31 Clear
>
> The card is blinking the red LED.
> Apparently all have gone well. But /var/log/asterisk/messages says:
>
> [May 29 18:34:40] ERROR[2780] chan_unicall.c: Unable to open channel 1:
>
>
>
> Invalid argument
> here = 0, tmp->channel = 0, channel = 1
> [May 29 18:34:40] ERROR[2780] chan_unicall.c: Unable to register channel
> '1-15'
>
> Any suggestion are wellcome.
>
> TIA
>
> Alejandro
>
>
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by
> http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
> --
> Alvaro I. Parres Peredo
> Director de IT
> Grupo Xmarts SA de CV
> Tel: +52 (33) 35 63 6261 Ext. 112
> 01 800 087 2260
> Cel: +52 (33) 33 68 1087
> alvaro.parres at xmarts.com.mx
> _______________________________________________
> -- Bandwidth and Colocation Provided by
> http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
> --
> Lic. Alejandro Fernández Herrero
> Product Manager
> www.all-control.com.ar
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
--
Telecomunicaciones Abiertas de México S.A. de C.V.
Carlos Chávez Prats
Director de Tecnologìa
+52-55-91169161 ext 2001
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 197 bytes
Desc: This is a digitally signed message part
Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20080602/a93c977b/attachment.pgp
More information about the asterisk-users
mailing list