[asterisk-users] Newbie in China: Red alaram in Zaptel for E1

[Lee, John (Sydney)]

>>
>> I tried the suggestion on
>> http://www.voip-info.org/wiki/view/Asterisk+MFC+R2 <http://www.voip-info.org/wiki/view/Asterisk+MFC+R2>  but the red alarm is
>> still on.

> An output of 'head -n 1 /proc/zaptel/*' after the fact might help us help
> you. Did you re-run ztcfg after editing zaptel.conf ?

Thanks Tzafrir 
 
(zaptel.conf)
span=1,1,0,cas,hdb3
cas=1-15:1111
cas=17-31:1111
dchan=16

# service zaptel restart
Unloading zaptel hardware drivers:ERROR: Module zaptel is in use
.
Loading zaptel framework:                                  [  OK  ]
Waiting for zap to come online...OK
Loading zaptel hardware modules: tor2.
 wct4xxp.
 wcte12xp.
 wct1xxp.
 wcte11xp.
 wctdm24xxp.
 wcfxo.
 wctdm.
 wcusb.
Running ztcfg:                                             [  OK  ]

# head -n 1 /proc/zaptel/*
==> /proc/zaptel/1 <==
Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" (MASTER) HDB3/ RED
==> /proc/zaptel/2 <==
Span 2: TE4/0/2 "T4XXP (PCI) Card 0 Span 2"
==> /proc/zaptel/3 <==
Span 3: TE4/0/3 "T4XXP (PCI) Card 0 Span 3"
==> /proc/zaptel/4 <==
Span 4: TE4/0/4 "T4XXP (PCI) Card 0 Span 4"

# ztcfg -vvvvv
Zaptel Version: 1.4.11
Echo Canceller: MG2
Configuration
======================
SPAN 1: CAS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
Channel map:
Channel 01: CAS / User (Default) (Slaves: 01)
Channel 02: CAS / User (Default) (Slaves: 02)
[...]
Channel 15: CAS / User (Default) (Slaves: 15)
Channel 16: D-channel (Default) (Slaves: 16)
Channel 17: CAS / User (Default) (Slaves: 17)
[...]
Channel 31: CAS / User (Default) (Slaves: 31)
31 channels to configure.

# cat /proc/zaptel/1
Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" (MASTER) HDB3/ RED
           1 TE4/0/1/1 CAS RED
           2 TE4/0/1/2 CAS RED
[...]
 
Any thoughts?
 
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080729/4885b2e0/attachment.htm