[asterisk-users] Newbie in China: Red alaram in Zaptel for E1

[Lee, John (Sydney)]

This time, I am trying to remotely install Asterisk in China.
I was told that an E1 line has been installed and so I plug it into port
1 of a TE412P.

On the box, first of all, I just installed Zaptel 1.4.10.1.
# service zaptel restart
Unloading zaptel hardware drivers:ERROR: Module zaptel is in use
.
Loading zaptel framework:                                  [  OK  ]
Waiting for zap to come online...OK
Loading zaptel hardware modules: tor2.
 wct4xxp.
 wcte12xp.
 wct1xxp.
 wcte11xp.
 wctdm24xxp.
 wcfxo.
 wctdm.
 wcusb.
Running ztcfg:                                             [  OK  ]

# vi zaptel.conf
[...]
span=1,1,0,ccs,hdb3,crc4
bchan=1-15,17-31
dchan=16

*** However, I received a red alarm in zttool and the LED on the TE412P
card is also red.
*** I have made sure that the jumper is closed for port 1 on the TE412P
card and so it could not be the jumper problem.

### Because this is the first time I install Asterisk in China and I was
wondering if their E1 is different from the Euro E1.
### However, I went into dmesg and I discovered the following.
### Could it really be a zaptel bug?  I saw on a similar few on the
digium bug list but I cannot be 100% sure.

Any thoughts? 

About to enter spanconfig!
Done with spanconfig!
Registered tone zone 33 (China)
About to enter startup!
TE4XXP: Span 1 configured for CCS/HDB3/CRC4
timing source auto card 0!
wct4xxp: Setting yellow alarm on span 1
timing source auto card 0!
VPM400: Not Present
VPM450: echo cancellation for 128 channels
********
********BUG: soft lockup - CPU#2 stuck for 16s! [ztcfg:4681]
********
Pid: 4681, comm:                ztcfg
EIP: 0060:[<f8cba1df>] CPU: 2
EIP is at init_vpm450m+0x32d/0x34a [wct4xxp]
 EFLAGS: 00000286    Tainted: G       (2.6.18-92.1.6.el5 #1)
EAX: 00000000 EBX: f76ae8f0 ECX: 00000019 EDX: 0000ffff
ESI: f7997400 EDI: 00000286 EBP: f76838c0 DS: 007b ES: 007b
CR0: 8005003b CR2: b7f01007 CR3: 37bc1000 CR4: 000006d0
 [<f8ca1b11>] t4_vpm450_init+0x18ce/0x198c [wct4xxp]
 [<f8ca5ee4>] t4_startup+0x4315/0x43c7 [wct4xxp]
 [<c042609c>] release_console_sem+0x17e/0x1b8
 [<c046d53a>] cache_alloc_refill+0x14b/0x450
 [<f8956f61>] zt_ioctl+0x273/0x144f [zaptel]
 [<c04d7d45>] generic_make_request+0x248/0x258
 [<c045ae3c>] __do_page_cache_readahead+0x69/0x1c6
 [<c0484a5b>] __d_lookup+0x98/0xdb
 [<c047c110>] do_lookup+0x53/0x166
 [<c047e7e4>] do_path_lookup+0x20e/0x25e
 [<c047c389>] permission+0xa2/0xb5
 [<c04e2d06>] kobject_get+0xf/0x13
 [<c046f7fa>] __dentry_open+0xea/0x1ab
 [<c046f91f>] nameidata_to_filp+0x19/0x28
 [<c046f959>] do_filp_open+0x2b/0x31
 [<c048029b>] do_ioctl+0x47/0x5d
 [<c04804fb>] vfs_ioctl+0x24a/0x25c
 [<c0471bbe>] __fput+0x13f/0x167
 [<c0480555>] sys_ioctl+0x48/0x5f
 [<c0404eff>] syscall_call+0x7/0xb
 =======================
VPM450: hardware DTMF disabled.
VPM450: Present and operational servicing 4 span(s)
Completed startup!