[asterisk-users] (no subject)

[Neha Punia]

Hi
I  m making a call from one asterisk server to an asterisk client
The call gets completed but I want it to send dtmf signals

The dialplan I have made for this is like
exten => 205,1,Answer
exten => 205,n,Wait(15)
exten => 205,n,Playback(dtmf-1)
exten => 205,n,Wait(20)

but it does not send any dtmf signal
where is the problem??

**************** CAUTION - Disclaimer *****************
This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely 
for the use of the addressee(s). If you are not the intended recipient, please 
notify the sender by e-mail and delete the original message. Further, you are not 
to copy, disclose, or distribute this e-mail or its contents to any other person and 
any such actions are unlawful. This e-mail may contain viruses. Infosys has taken 
every reasonable precaution to minimize this risk, but is not liable for any damage 
you may sustain as a result of any virus in this e-mail. You should carry out your 
own virus checks before opening the e-mail or attachment. Infosys reserves the 
right to monitor and review the content of all messages sent to or from this e-mail 
address. Messages sent to or from this e-mail address may be stored on the 
Infosys e-mail system.
***INFOSYS******** End of Disclaimer ********INFOSYS***
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080703/f4a0286a/attachment.htm