[asterisk-users] new install of asterisk appliance.

Thu Jul 3 01:46:04 CDT 2008

The Asterisk appliance can currently only auto-provision Polycom phones, 
so you're going to need to manually configure the Grandstream phones.

Sydney Web Hosting wrote:
>
> I have 1 nic card which is linked to the router.
>
> Then I use 1 port on the router which is linked to the asterisk appliance.
>
> but as Rob hillis said.
>
> It will work via WAN which ive now got. SO I can access the asterisk 
> appliance via 192.168.1.15
>
> The problem is now…How do I connect the phone.
>
> Ive got the phone (Ethernet) connected from the LAN port on the phone 
> to a LAN port in the asterisk appliance.
>
> im using the grandstream 2020.
>
>  
>
> *From:* asterisk-users-bounces at lists.digium.com 
> [mailto:asterisk-users-bounces at lists.digium.com] *On Behalf Of *Dean 
> Collins
> *Sent:* Thursday, 3 July 2008 12:03 PM
> *To:* Asterisk Users Mailing List - Non-Commercial Discussion
> *Subject:* Re: [asterisk-users] new install of asterisk appliance.
>
>  
>
> Ok so as you describe it you are only using 1 nic card in your sbs2003 
> server?
>
>  
>
> But you have two devices connected to it? Care to explain?
>
>  
>
>
> Cheers,
>
> Dean
>
> ------------------------------------------------------------------------
>
> *From:* asterisk-users-bounces at lists.digium.com 
> [mailto:asterisk-users-bounces at lists.digium.com] *On Behalf Of *Sydney 
> Web Hosting
> *Sent:* Wednesday, 2 July 2008 9:14 PM
> *To:* 'Asterisk Users Mailing List - Non-Commercial Discussion'
> *Subject:* Re: [asterisk-users] new install of asterisk appliance.
>
>  
>
> I agree. ;-)
>
> here is our setup.
>
>  
>
> Router
>
> |
>
> |
>
> SBS server 2003 Nic 1
>
> |
>
> 4port gb switch
>
> |                       |          
>
> |                       |
>
> Pc’s        Asterisk server
>
>  
>
>  
>
> *From:* asterisk-users-bounces at lists.digium.com 
> [mailto:asterisk-users-bounces at lists.digium.com] *On Behalf Of *Dean 
> Collins
> *Sent:* Thursday, 3 July 2008 10:22 AM
> *To:* Asterisk Users Mailing List - Non-Commercial Discussion
> *Subject:* Re: [asterisk-users] new install of asterisk appliance.
>
>  
>
> Davey, not to second guess you but sounds like you don’t have a clue.
>
>  
>
> This is the way I have my network setup.
>
>  
>
>  
>
>  
>
> Router
>
> |
>
> |
>
> SBS server 2003 Nic 1
>
> SBS server 2003 Nic 2
>
> |
>
> |
>
> 16port gb switch
>
> |                       |          
>
> |                       |
>
> Pc’s        Asterisk server
>
>  
>
>  
>
>
> Cheers,
>
> Dean
>
> ------------------------------------------------------------------------
>
> *From:* asterisk-users-bounces at lists.digium.com 
> [mailto:asterisk-users-bounces at lists.digium.com] *On Behalf Of *Sydney 
> Web Hosting
> *Sent:* Wednesday, 2 July 2008 8:13 PM
> *To:* 'Asterisk Users Mailing List - Non-Commercial Discussion'
> *Subject:* Re: [asterisk-users] new install of asterisk appliance.
>
>  
>
> Netcomm is directly connected to the server via server network card.
>
> ive now got it up and running. I changed the WAN info in asterisk 
> appliance, not the LAN info.
>
> Now the phone wont get connected. Ive added an ip directly into phone 
> with correct settings.
>
> but when I access it via web browser it doesn’t come up.
>
> Should I be able to access it.
>
>  
>
> *From:* asterisk-users-bounces at lists.digium.com 
> [mailto:asterisk-users-bounces at lists.digium.com] *On Behalf Of *Dean 
> Collins
> *Sent:* Thursday, 3 July 2008 9:40 AM
> *To:* Asterisk Users Mailing List - Non-Commercial Discussion
> *Subject:* Re: [asterisk-users] new install of asterisk appliance.
>
>  
>
> But where is the windows 2003 server?
>
>  
>
>
> Cheers,
>
> Dean
>
> ------------------------------------------------------------------------
>
> *From:* asterisk-users-bounces at lists.digium.com 
> [mailto:asterisk-users-bounces at lists.digium.com] *On Behalf Of *Sydney 
> Web Hosting
> *Sent:* Wednesday, 2 July 2008 7:20 PM
> *To:* 'Asterisk Users Mailing List - Non-Commercial Discussion'
> *Subject:* Re: [asterisk-users] new install of asterisk appliance.
>
>  
>
> No.
>
> ive got the netcomm router.
>
> of the netcomm router ive got 1 LAN port going into the WAN port of 
> the appliance.
>
> Then 1 LAn port from the appliance goes to my PC.
>
>  
>
> *From:* asterisk-users-bounces at lists.digium.com 
> [mailto:asterisk-users-bounces at lists.digium.com] *On Behalf Of *Dean 
> Collins
> *Sent:* Thursday, 3 July 2008 8:22 AM
> *To:* Asterisk Users Mailing List - Non-Commercial Discussion
> *Subject:* Re: [asterisk-users] new install of asterisk appliance.
>
>  
>
> Can you ping the ip address from another machine on your lan.
>
>  
>
>
> Cheers,
>
> Dean
>
> ------------------------------------------------------------------------
>
> *From:* asterisk-users-bounces at lists.digium.com 
> [mailto:asterisk-users-bounces at lists.digium.com] *On Behalf Of *Sydney 
> Web Hosting
> *Sent:* Wednesday, 2 July 2008 5:59 PM
> *To:* 'Asterisk Users Mailing List - Non-Commercial Discussion'
> *Subject:* Re: [asterisk-users] new install of asterisk appliance.
>
>  
>
> Just confirming that 192.168.1.1 to 192.168.1.150 is your existing lan 
> range correct?
>
> Yes this is correct. The range is actually 192.168.1.1 to 192.168.1.254
>
>  
>
> *From:* asterisk-users-bounces at lists.digium.com 
> [mailto:asterisk-users-bounces at lists.digium.com] *On Behalf Of *Dean 
> Collins
> *Sent:* Wednesday, 2 July 2008 10:18 PM
> *To:* Asterisk Users Mailing List - Non-Commercial Discussion
> *Subject:* Re: [asterisk-users] new install of asterisk appliance.
>
>  
>
> Hi Davey,
>
>  
>
> Just confirming that 192.168.1.1 to 192.168.1.150 is your existing lan 
> range correct?
>
>  
>
> (and not a new address range that you didn’t configure properly in 
> sbs2003 – also I’m assuming you are using Isa2004 as well correct?)
>
>  
>
>
> Cheers,
>
> Dean
>
> ------------------------------------------------------------------------
>
> *From:* asterisk-users-bounces at lists.digium.com 
> [mailto:asterisk-users-bounces at lists.digium.com] *On Behalf Of *Sydney 
> Web Hosting
> *Sent:* Wednesday, 2 July 2008 8:05 AM
> *To:* asterisk-users at lists.digium.com
> *Subject:* [asterisk-users] new install of asterisk appliance.
>
>  
>
> Hi All,
>
> Ive just purchased an asterisk appliance. (AA50)
>
> ive connected the AA50 to my pc directly via Ethernet and logged in 
> via 192.168.169.1 and I can log in fine.
>
> But then when I go into the asterisk gui > network to change the 
> settings to get it on our LAN im having trouble.
>
> It just won’t connect via the ip address ive assigned it of 192.168.1.15
>
> Im on a windows network. (sbs2003 server)
>
> The changes Ive made in asterisk are as follows.
>
> (Under lan)
> IP = 192.168.1.15
> DNS = 192.168.1.1
> IP start range = 192.168.1.15
> END range = 192.168.1.150
>
> Im assuming that I have to change this info so I can access it via the 
> network, rather than to have it connected to my pc all of the time.
>
> What am I doing wrong?
>
>  
>
> Regards
> Davey.
>
>  
>
>  
>
> !DSPAM:486c62d976291041515831!
> ------------------------------------------------------------------------
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> AstriCon 2008 - September 22 - 25 Phoenix, Arizona
> Register Now: http://www.astricon.net
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
> !DSPAM:486c62d976291041515831!
>   