[asterisk-users] 2 AVM ISDN Fritzcards

[Dave Cotton]

Simon wrote:
> Hi There,
> 
> Has anyone managed to get 2 AVM ISDN Fritzcard's working in with a 2.6
> kernel system?
> 

Yes, with Suse 10.2/10.3 and chan_misdn.

/usr/sbin/misdn-init config wrote this:-

#
# Configuration file for your misdn hardware
#
# Usage: /usr/sbin/misdn-init start|stop|restart|config|scan|help
#
#
# Card Settings
#
# Syntax: card=<number>,<type>[,<option>...]
#
#    <number>   count your cards beginning with 1
#    <type>     either 0x1,0x4 or 0x8 for your hfcmulti hardware,
#               or the name of your card driver module.
#    <option>   ulaw       - uLaw (instead of aLaw)
#               dtmf       - enable DTMF detection on all B-channels
#
#               pcm_slave  - set PCM bus into slave mode
#                            If you have a set of cards, all wired via #
card=1,avmfritz
card=2,avmfritz
#
# Port settings
#
# Syntax: <port_type>=<port_number>[,<port_number>...]
#
#    <port_type>    te_ptp              - TE-Mode, PTP
#                   te_ptmp             - TE-Mode, PTMP
#                   te_capi_ptp         - TE-Mode (capi), PTP
#                   te_capi_ptmp        - TE-Mode (capi), PTMP
#                   nt_ptp              - NT-Mode, PTP
#                   nt_ptmp             - NT-Mode, PTMP
#    <port_number>  port that should be considered
#
te_ptmp=1,2
 
 



DC