[asterisk-users] new install of asterisk appliance.

[Sydney Web Hosting]

Just confirming that 192.168.1.1 to 192.168.1.150 is your existing lan range
correct?

Yes this is correct. The range is actually 192.168.1.1 to 192.168.1.254

 

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Dean Collins
Sent: Wednesday, 2 July 2008 10:18 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] new install of asterisk appliance.

 

Hi Davey,

 

Just confirming that 192.168.1.1 to 192.168.1.150 is your existing lan range
correct?

 

(and not a new address range that you didn't configure properly in sbs2003 -
also I'm assuming you are using Isa2004 as well correct?)

 


Cheers,

Dean

  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Sydney Web
Hosting
Sent: Wednesday, 2 July 2008 8:05 AM
To: asterisk-users at lists.digium.com
Subject: [asterisk-users] new install of asterisk appliance.

 

Hi All,

Ive just purchased an asterisk appliance. (AA50)

ive connected the AA50 to my pc directly via Ethernet and logged in via
192.168.169.1 and I can log in fine.

But then when I go into the asterisk gui > network to change the settings to
get it on our LAN im having trouble.

It just won't connect via the ip address ive assigned it of 192.168.1.15

Im on a windows network. (sbs2003 server)

The changes Ive made in asterisk are as follows.

(Under lan)
IP = 192.168.1.15
DNS = 192.168.1.1
IP start range = 192.168.1.15
END range = 192.168.1.150

Im assuming that I have to change this info so I can access it via the
network, rather than to have it connected to my pc all of the time.

What am I doing wrong?

 

Regards
Davey.

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080703/847269ce/attachment.htm